Digest for sci.electronics.repair@googlegroups.com - 10 updates in 4 topics

pearsoneducator@gmail.com: Aug 30 08:02PM -0700

New test banks and solutions manuals for latest books. Full packages available at a discounted price of of $60. Get Full solution manuals, test banks and PPT's for a text book just for $60. Amazing deal.
Will help you prepare for the course with an added advantage. Please contact to buy the packages: allsolutionmanuals11@gmail.com.
2016 Corporations, Partnerships, Estates & Trusts, 29E IRM
2016 Corporations, Partnerships, Estates & Trusts, 29E ISM
2016 Corporations, Partnerships, Estates & Trusts, 29E PPT
2016 Corporations, Partnerships, Estates & Trusts, 29E TB
2016 Individuals, 29 ISM
2016 Individuals, 29E IRM
2016 Individuals, 29E PPT
2016 Individuals, 29E TB
Administrative Law Hall 6E IM with Test bank
Business Analytics, 2E Evans ISM
Business Analytics, 2E Evans Tb
Business Communication Essentials, 7E ISM Bovee
Business Communication Essentials, 7E TB Bovee
Business Communication Polishing Your Professional Presence, 3E Shwom ISM
Business Communication Polishing Your Professional Presence, 3E Shwom TB
Business Communication Today, 13E ISM Bovee
Business Communication Today, 13E TB Bovee
Business Law Legal Environment, Online Commerce, Business Ethics, and International Issues,, 9E Cheeseman ISM
Business Law Legal Environment, Online Commerce, Business Ethics, and International Issues,, 9E Cheeseman TB
College Accounting A Practical Approach, 13E SM Slater
College Accounting A Practical Approach, 13E Slater TB
Contemporary Business Law, 8E Cheeseman ISM
Contemporary Business Law, 8E Cheeseman TB
Detecting accounting fraud Analysis and ethics ISM Jackson
Environmental Law, 8E Kubasek IM
Excellence in Business Communication, 11E ISM Bovee Thill
Excellence in Business Communication, 11E Tb Bovee Thill
Financial Accounting, 10E Harrison ISM
Financial Accounting, 10E test bank Harrison
Financial Accounting, 3E Kemp TB
Financial Accounting, 3E kemp ISM
Forensic Accounting Rufus ISM
Forensic Accounting Rufus TB
Horngren's Accounting, 11E E Solution manual
Horngren's Accounting, 11E Test bank
Horngren's Financial & Managerial Accounting, 5E ISM
Horngren's Financial & Managerial Accounting, 5E test bank
Intermediate accounting Gordon IM
Intermediate accounting Gordon ISM
Intro to Law 5E Hames IM with Test bank
Introduction to Management Accounting, 16E ISM
Introduction to Management Accounting, 16E test bank
Introduction to Management Science, 12E PPT Taylor
Introduction to Management Science, 12E TB Taylor
Introduction to Operations and Supply Chain Management, 4E Bozarth ISM
Introduction to Operations and Supply Chain Management, 4E Bozarth PPT
Introduction to Operations and Supply Chain Management, 4E Bozarth TB
Legal Environment of Business Online Commerce, Ethics, and Global Issues, 8E Cheeseman ISM
Legal Environment of Business Online Commerce, Ethics, and Global Issues, 8E Cheeseman TB
Management Communication, 5E IM ORourke
Management Communication, 5E ORourke TB
Managerial Accounting Decision Making and Motivating Performance Datar TB
Managerial Accounting Decision Making and Motivating Performance ISM Datar Rajan
Managerial Accounting, 4E Braun ISM
Managerial Accounting, 4E TB Braun
Managing Supply Chain and Operations Foster ISM
Managing Supply Chain and Operations Foster PPT
Managing Supply Chain and Operations Foster TB
Personal Finance Turning Money into Wealth, 7E Keown ISM
Personal Finance Turning Money into Wealth, 7E Keown PPT
Personal Finance Turning Money into Wealth, 7E Keown TB
Personal Finance, 5E Madura ISM
Personal Finance, 5E Madura PPT
Personal Finance, 5E Madura Tb
Prentice Hall's Federal Taxation 2016 Comprehensive, 29 E IRM
Prentice Hall's Federal Taxation 2016 Comprehensive, 29 E ISM
Prentice Hall's Federal Taxation 2016 Comprehensive, 29 E Instructors PPT
Prentice Hall's Federal Taxation 2016 Comprehensive, 29 E TB
Project Management Achieving Competitive Advantage, 4E Pinto ISM
Project Management Achieving Competitive Advantage, 4E Pinto PPT
Project Management Achieving Competitive Advantage, 4E Pinto Tb
Quality Management for Organizational Excellence Introduction to Total Quality, 8E Goetsch ISM
Quality Management for Organizational Excellence Introduction to Total Quality, 8E Goetsch ppt
Solutions Manual (Download only) for Taxes & Business Strategy, 5E Scholes.pdf
Supply Chain Management Strategy, Planning, and Operation, 6E Chopra ISM
Supply Chain Management Strategy, Planning, and Operation, 6E Chopra PPT
Supply Chain Management Strategy, Planning, and Operation, 6E Chopra Tb
The Legal Environment of Business, 7E Kubasek TB
The Legal Environment of Business, 7E Kubasek ISM
The Paralegal Professional Goldman IRM 4E
Understanding Financial Statements, 11E Fraser ISM
Understanding Financial Statements, 11E Fraser Test bank
pearsoneducator@gmail.com: Aug 30 08:03PM -0700

New test banks and solutions manuals for latest books. Full packages available at a discounted price of of $60. Get Full solution manuals, test banks and PPT's for a text book just for $60. Amazing deal.
Will help you prepare for the course with an added advantage. Please contact to buy the packages: allsolutionmanuals11@gmail.com.
2016 Corporations, Partnerships, Estates & Trusts, 29E IRM
2016 Corporations, Partnerships, Estates & Trusts, 29E ISM
2016 Corporations, Partnerships, Estates & Trusts, 29E PPT
2016 Corporations, Partnerships, Estates & Trusts, 29E TB
2016 Individuals, 29 ISM
2016 Individuals, 29E IRM
2016 Individuals, 29E PPT
2016 Individuals, 29E TB
Administrative Law Hall 6E IM with Test bank
Business Analytics, 2E Evans ISM
Business Analytics, 2E Evans Tb
Business Communication Essentials, 7E ISM Bovee
Business Communication Essentials, 7E TB Bovee
Business Communication Polishing Your Professional Presence, 3E Shwom ISM
Business Communication Polishing Your Professional Presence, 3E Shwom TB
Business Communication Today, 13E ISM Bovee
Business Communication Today, 13E TB Bovee
Business Law Legal Environment, Online Commerce, Business Ethics, and International Issues,, 9E Cheeseman ISM
Business Law Legal Environment, Online Commerce, Business Ethics, and International Issues,, 9E Cheeseman TB
College Accounting A Practical Approach, 13E SM Slater
College Accounting A Practical Approach, 13E Slater TB
Contemporary Business Law, 8E Cheeseman ISM
Contemporary Business Law, 8E Cheeseman TB
Detecting accounting fraud Analysis and ethics ISM Jackson
Environmental Law, 8E Kubasek IM
Excellence in Business Communication, 11E ISM Bovee Thill
Excellence in Business Communication, 11E Tb Bovee Thill
Financial Accounting, 10E Harrison ISM
Financial Accounting, 10E test bank Harrison
Financial Accounting, 3E Kemp TB
Financial Accounting, 3E kemp ISM
Forensic Accounting Rufus ISM
Forensic Accounting Rufus TB
Horngren's Accounting, 11E E Solution manual
Horngren's Accounting, 11E Test bank
Horngren's Financial & Managerial Accounting, 5E ISM
Horngren's Financial & Managerial Accounting, 5E test bank
Intermediate accounting Gordon IM
Intermediate accounting Gordon ISM
Intro to Law 5E Hames IM with Test bank
Introduction to Management Accounting, 16E ISM
Introduction to Management Accounting, 16E test bank
Introduction to Management Science, 12E PPT Taylor
Introduction to Management Science, 12E TB Taylor
Introduction to Operations and Supply Chain Management, 4E Bozarth ISM
Introduction to Operations and Supply Chain Management, 4E Bozarth PPT
Introduction to Operations and Supply Chain Management, 4E Bozarth TB
Legal Environment of Business Online Commerce, Ethics, and Global Issues, 8E Cheeseman ISM
Legal Environment of Business Online Commerce, Ethics, and Global Issues, 8E Cheeseman TB
Management Communication, 5E IM ORourke
Management Communication, 5E ORourke TB
Managerial Accounting Decision Making and Motivating Performance Datar TB
Managerial Accounting Decision Making and Motivating Performance ISM Datar Rajan
Managerial Accounting, 4E Braun ISM
Managerial Accounting, 4E TB Braun
Managing Supply Chain and Operations Foster ISM
Managing Supply Chain and Operations Foster PPT
Managing Supply Chain and Operations Foster TB
Personal Finance Turning Money into Wealth, 7E Keown ISM
Personal Finance Turning Money into Wealth, 7E Keown PPT
Personal Finance Turning Money into Wealth, 7E Keown TB
Personal Finance, 5E Madura ISM
Personal Finance, 5E Madura PPT
Personal Finance, 5E Madura Tb
Prentice Hall's Federal Taxation 2016 Comprehensive, 29 E IRM
Prentice Hall's Federal Taxation 2016 Comprehensive, 29 E ISM
Prentice Hall's Federal Taxation 2016 Comprehensive, 29 E Instructors PPT
Prentice Hall's Federal Taxation 2016 Comprehensive, 29 E TB
Project Management Achieving Competitive Advantage, 4E Pinto ISM
Project Management Achieving Competitive Advantage, 4E Pinto PPT
Project Management Achieving Competitive Advantage, 4E Pinto Tb
Quality Management for Organizational Excellence Introduction to Total Quality, 8E Goetsch ISM
Quality Management for Organizational Excellence Introduction to Total Quality, 8E Goetsch ppt
Solutions Manual (Download only) for Taxes & Business Strategy, 5E Scholes.pdf
Supply Chain Management Strategy, Planning, and Operation, 6E Chopra ISM
Supply Chain Management Strategy, Planning, and Operation, 6E Chopra PPT
Supply Chain Management Strategy, Planning, and Operation, 6E Chopra Tb
The Legal Environment of Business, 7E Kubasek TB
The Legal Environment of Business, 7E Kubasek ISM
The Paralegal Professional Goldman IRM 4E
Understanding Financial Statements, 11E Fraser ISM
Understanding Financial Statements, 11E Fraser Test bank
Jeff Liebermann <jeffl@cruzio.com>: Aug 30 09:58AM -0700

On Sun, 30 Aug 2015 08:49:52 -0400, micky <NONONOmisc07@bigfoot.com>
wrote:
 
 
>But I taught myself to think about a cheap dinner plate that has falled
>and broken into 20 pieces. Is it really worth fixing, just because I
>can?
 
That can be easily calculated. However, I need a number from you.
What percentage of the replacement cost of a specific item would you
consider spending (per year) on its repair? Obviously, that varies
with what is being repaired and any emotional attachment to it.
 
Let's see how it might work. The OP was asking about his 32 inch
Insignia NS-L32Q-10A LCD TV which just sold on eBay for $75 plus
something for shipping:
<http://www.ebay.com/itm/171905109763>
That sets the replacement cost of the TV. For used, my personal
maximum would be about 40% of the replacement cost. That would be
about $30 maximum for the repair. Assuming my time to be worthless,
buying a replacement board for $30 is marginal.
 
If he brought the TV to my shop where I charge $75/hr, my guess is $50
minimum charge for the repair, or about $100 if I replace the main
board (mostly consumed by testing to insure there are no additional
problems).
 
I might go for a higher percentage for something more expensive. Home
repair can sometime exceed the value of the structure. At the low
extreme, shipping can be more than the value of the product.
 
I've ranted and discussed the cost of repair issue several times in
the past. It's important to me because it sets the prices and rates
at which I can charge for my repair services. I can dig out the old
articles if you're interested.
 
 
 
--
Jeff Liebermann jeffl@cruzio.com
150 Felker St #D http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558
jurb6006@gmail.com: Aug 30 10:14AM -0700

Believe it or not you might be able to sell it to someone who needs on but doesn't care about off the air TV. Alot of people have cable or dish that requires a box anyway and most of them have video output, if not HDMI etc.
amdx <nojunk@knology.net>: Aug 30 12:33PM -0500

On 8/30/2015 11:31 AM, Jeff Liebermann wrote:
 
>> Ya, maybe a little better than that, I didn't work 7 days a week!
 
> Ok. 20 working days per month makes 5 VCR's per day, which is even
> more impressive.
 
It's not bragging if you did it right?
Ok, one week during the Christmas return season, I repaired 84 vcrs.
Most came from the 3 Big box retailers, in boxes.
I billed a little over $6,000 and got a $3,000 paycheck. Yes, I worked 7
days and more than 8 hrs a day. Many of the repairs were Fisher and
Sanyo VCR's with the same problems over and over. Any repairs that
looked like they might take real troubleshooting were moved to next
week. If I needed a part that I didn't have in stock, I usually had a
VCR on the shelf that had the part.
 
I needed to move them out, the 120 VCR's stacked up, was only the
start, the tv tech had his pile and the audio guy too. The shop got
crowded. The boss also had guy that went to the stores picked up the
repairs and delivered them when completed.
Another advantage to having lots of the same model, if I had a tough
dog, I could do the besideja method. Putting a working model beside me
and see what was different.
 
 
> shipment. I had to learn the machine over again with every shipment,
> roughly once per month. Not knowing that this was not exactly normal
> or optimum, I just accepted it and plodded forward.
 
When doing repairs, I hate the learning curve, especially when you know
you'll never see one of these again.
The biggest pleasure was, as the repair business started to wear on
you, a service class would come up, you go to the class and learn just
how cool all these parts put together as a circuit and combined with
other circuits and WOW, this thing is amazing.
 
 
>> dropping, I thought about jumping into those, I'm glad I didn't, the
>> prices for those dropped quick.
 
> Good move.
 
Ya, that's when I sold my home my rentals and moved to Florida.
 
> However, I would like to thank you for
> improving the aesthetic quality of your postings by removing the
> advertisement.
 
It was my pleasure.
As Maya Angelo said, "When you know better, you do better".
 
Mikek
avagadro7@gmail.com: Aug 30 04:25PM -0700

moron
clare@snyder.on.ca: Aug 30 04:14PM -0400

On 27 Aug 2015 21:18:22 GMT, cf005@FreeNet.Carleton.CA (M.A. Stewart)
wrote:
 
>mastered in about nine minutes. Hell, when he got out the car he
>was probably speaking fluent Finnish, without a trace of an Oz accent.
 
>> And then somebody invented the Hill Holder device for cars and trucks.
Left foot braking a front drive vehicle in competition can allow the
driver to hang the rear end out like a rear driver. Generally it is
done with the hand brake - but on a SAAB the hand brake operates on
the front wheels - so jabbing the brake with the left foot while the
right is firmly planted on the "loud pedal" can break the rear wheels
loose, allowing them to slide, shortening the turning radius
significantly.
amdx <nojunk@knology.net>: Aug 30 11:56AM -0500

On 8/30/2015 10:36 AM, ceg wrote:
 
> Like, why doesn't a pencil work?
> Why doesn't a q-tip work?
 
> What's a stylus do that a finger does but that a paperclip doesn't do?
 
Oh you mean the stylus is proprietary! he says with scorn, or was it envy.
 
Mikek
 
I don't know the answer, it could be interesting.
"Kenny" <me@privacy.net>: Aug 30 06:25PM +0100

See differences between resistive and capacitive touchscreens:
http://www.makeuseof.com/tag/differences-capacitive-resistive-touchscreens-si/
Assuming iPad is capacitive loads of links for making your own:
https://www.google.co.uk/search?q=make+a+capacitive+stylus&ie=utf-8&oe=utf-8&gws_rd=cr&ei=nTvjVafJFLGd7gbrpbiACQ
 
Kenny
 
"ceg" wrote in message news:mrtv37$srq$3@news.mixmin.net...
 
A THIN stylus for the iPad seems to cost over $75:
http://www.wacom.com/en-us/products/stylus/intuos-creative-stylus-2
http://www.adonit.net
 
Since a stylus should be pretty simple sans moving parts, how does it
work and, more importantly, can we craft one out of readily available
materials that has a thin (pen-like) point?
Michael Black <et472@ncf.ca>: Aug 30 02:01PM -0400

You received this digest because you're subscribed to updates for this group. You can change your settings on the group membership page.
To unsubscribe from this group and stop receiving emails from it send an email to sci.electronics.repair+unsubscribe@googlegroups.com.

Digest for sci.electronics.repair@googlegroups.com - 16 updates in 5 topics

amdx <nojunk@knology.net>: Aug 29 03:40PM -0500

On 8/28/2015 3:51 PM, Jeff Liebermann wrote:
> too far away, so I can't be more specific. Looks like the center pad
> might have ripped off, so there will be some PCB trace work involved.
> For cost, just ask for how much shop time costs.
 
Back in the olden days, I repaired many RF converters, when people
ripped the F connectors out of VCR's.
Usually super glued the pcb into normal position, then scraped the
foils and laid a piece of fine wire across the breaks and soldered it in
place. I often had to solder the F connector back into the RF converter,
because once the original crimp was torn loose, a solid mechanical
repair required it.
From 1984 to 1994, I had 11,000 vcr repairs, The first 6 or 7 years
were the boom time for VCR's, then the price started dropping by the
time I quit, the price was had hit $200 and less. People started
declining repair and buying new ones. I turned my position over to
another tech and moved to Florida. I returned a year later for a visit,
the tech said he only came in about twice a week to do repairs. The
volume had dropped considerably.
Mikek
 
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
"dusty" <dusty@dot.com>: Aug 29 06:09PM -0500

> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
 
Being able to buy a replacement board on eBay, for a low price,
plug it in, makes it easy for anyone to fix their own. Someone
more skilled could fix the old one.
 
I just wonder what to do with the old board? The eBay store doesn't
say anything about wanting it for exchange. I'd hate to throw it away.
Do you know of a place that would want it?
 
There isn't a recycling place anywhere nearby for electronics. There's
probably one 100 miles away in Lubbock. I've got some other things
to get rid of.
 
Back in the late 70's, I had a Zenith TV that blew a board every six
months. They charged me $100 a couple of times to replace it.
It was the board for a built in phone. When it worked, it worked good.
 
l probably would have liked working with electronics, if I could have
gotten a start when I was young. We have oil fields around here, so
I got started in that.
 
I've fixed a lot of simple things with solder. That board is beyond my skill
level. Some people I used to work with thought I was a genius because
I could solder a few things. They could have done those things if they'd
tried. I'm getting too old and shaky to do fine work.
Jeff Liebermann <jeffl@cruzio.com>: Aug 29 07:05PM -0700

>place. I often had to solder the F connector back into the RF converter,
>because once the original crimp was torn loose, a solid mechanical
>repair required it.
 
I had problems getting a solid support for the F-connector with a
cracked PCB. I used epoxy to hold the board together and did exactly
as you describe to fix the wiring. For supporting the F connection, I
added a brass washer and 3/8-32 nut. I then tack soldered the brass
washer to the tin plated tuner can. For those devices where that
wasn't possible, I installed a pigtail with an F-connector on the end.
If I was lazy and the front end had a 300 ohm input, I would install a
300-75 ohm balun hanging off the back.
 
>From 1984 to 1994, I had 11,000 vcr repairs,
 
Nice. That's 10 years or 1,100 VCR's per year, or roughly 100 per
month, or about 3 per day. One can make good money doing that kind of
volume.
 
>were the boom time for VCR's, then the price started dropping by the
>time I quit, the price was had hit $200 and less. People started
>declining repair and buying new ones.
 
I'm seeing much the same thing in the computah repair biz. Between
the release of Windoze 95 in 1995, and the end of the Y2K scare,
business was booming. It was not unusual to bill customers 33% of the
value of a new $3,000 machine for repairs and upgrades. However, for
personal reasons, I was not able to work much and could not take
advantage of the PC boom to enrich myself. After about 2002,
everything collapsed because the Y2K scare had forced most users buy
new machines, which they intended to amortize over a longer period.
Windoze XP was a major improvement over pervious Windoze mutations,
which resulted in a further reduction in work. Without my multiple
businesses, I would have given up. Today, it is possible to buy a
complete and functional desktop for about $700. Customers are usually
not willing to pay more then 25% to 33% of the replacement cost of a
machine on repairs. So, my maximum billing has dropped to about $200
per machine. At $75/yr, that's about 2.5 hrs, which doesn't leave me
much time to do complicated and lengthy repairs that were previously
both necessary and profitable.
 
>another tech and moved to Florida. I returned a year later for a visit,
>the tech said he only came in about twice a week to do repairs. The
>volume had dropped considerably.
 
Bummer. However, obsolescence and dropping prices is a way of life in
the tech sector. I used to be in the digital watch and calculator
repair business when they were profitable and was fortunate enough to
bail out before the prices crashed.
 
>This email has been checked for viruses by Avast antivirus software.
>https://www.avast.com/antivirus
 
Suggestion: Go into:
Avast -> Settings -> Active Protection -> Mail Shield
-> Customize -> Main Settings
and uncheck the box "Scan Outbound Mail SMTP". That will make the
above advertisement disappear. You don't really need to scan outgoing
email as anything that turns your machine into a spam bot will be
fairly obvious. However, if you want to scan outgoing email, you can
get rid of the message with:
Avast -> Settings -> Active Protection -> Mail Shield
-> Customize -> Behavior
and unchecking "Insert Note into clean message (outgoing)".
 
 
 
--
Jeff Liebermann jeffl@cruzio.com
150 Felker St #D http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558
micky <NONONOmisc07@bigfoot.com>: Aug 30 08:49AM -0400

In sci.electronics.repair, on Sat, 29 Aug 2015 19:05:29 -0700, Jeff
>>volume had dropped considerably.
 
>Bummer. However, obsolescence and dropping prices is a way of life in
>the tech sector
 
I have trouble reconciling myself with the idea that something is broken
beyond repair, when I know it can be repaired.
 
But I taught myself to think about a cheap dinner plate that has falled
and broken into 20 pieces. Is it really worth fixing, just because I
can?
amdx <nojunk@knology.net>: Aug 30 08:56AM -0500

On 8/29/2015 9:05 PM, Jeff Liebermann wrote:
> as you describe to fix the wiring. For supporting the F connection, I
> added a brass washer and 3/8-32 nut. I then tack soldered the brass
> washer to the tin plated tuner can.
 
The RF converters had a framework and then snap on covers. I would
file the bottom ring on the connector and tin it and the frame, The I
could usually lay a nice bead around it. Always with the freeze mist
handy to keep the internal plastic of the F connector from melting.
 
 
 
>>From 1984 to 1994, I had 11,000 vcr repairs,
 
> Nice. That's 10 years or 1,100 VCR's per year, or roughly 100 per
> month, or about 3 per day.
 
 
Ya, maybe a little better than that, I didn't work 7 days a week!
 
 
> One can make good money doing that kind of volume.
 
Ya, for a poor boy I did real well in 86, 87, 88, and 89.
The VCR craze built several retail chains during those years.
In 87 and 88 my share was $60k each year. Have never earned
as much again, even in inflated dollars.
The service center owner had a good setup. He tried to get warranty
service for any company he could. We had manuals, because we did
warranty repairs. In the early years the VCR companies paid very well
for warranty service. We had 3 big box retailers we did, warranty and
contract repairs for. Remember those service contracts sold by the
stores? Did great for the stores and me!
All techs were independent contractors, we could come and go on our
schedule, working any hours we wanted. I often had an afternoon nap! The
owner had a front counter that did a pretty good job of shielding us
from the---public---. We worked for a percentage of the labor and the
percentage increased after a certain amount. Great incentive to get more
work done. The independent contractor status probably would not have
passed an IRS test, but I would not have changed it.
We had a non refundable $39 troubleshooting fee, it would be
subtracted from the total bill. That pushed many people to part with
another $40 or $60 just because they already had $39 into it.
Because I worked on the same models over and over, I was paid for my
experience more than my time.
 
 
> the tech sector. I used to be in the digital watch and calculator
> repair business when they were profitable and was fortunate enough to
> bail out before the prices crashed.
 
DVD player sales were coming on at the time VCR's prices were
dropping, I thought about jumping into those, I'm glad I didn't, the
prices for those dropped quick.
 
> Avast -> Settings -> Active Protection -> Mail Shield
> -> Customize -> Behavior
> and unchecking "Insert Note into clean message (outgoing)".
 
Ok, I did the latter, do I owe you a consultation fee, or do you
owe me a psychiatric fee for easing your angst? :-)
 
Thanks, Mikek
Jeff Liebermann <jeffl@cruzio.com>: Aug 30 09:31AM -0700

>file the bottom ring on the connector and tin it and the frame, The I
>could usually lay a nice bead around it. Always with the freeze mist
>handy to keep the internal plastic of the F connector from melting.
 
I wanted to avoid soldering to the F-connector. It was easier to tack
solder to the brass washer than to the connector. It was especially
handy for zinc and cadmium plated connectors, which would not solder
without grinding off the plating. Sometimes, the base metal was some
kind of aluminum copper mix, that also wouldn't solder. It became a
fairly common repair so I pre-tinned a box of brass washers and used
them as needed. I still have the box, somewhere. For where I had to
solder to the connector, I had a male F-connector with a heat sink
attached to conduct and then radiate as much heat as possible. The
center pin was the key because if the dielectric melted, it would
reform in the same position when cooled, held in place by the center
pin. All my few TV F-connector repairs included a push on adapter,
mostly because I didn't want to see the TV again after the owner
tripped over the cable again.
 
 
>> Nice. That's 10 years or 1,100 VCR's per year, or roughly 100 per
>> month, or about 3 per day.
 
> Ya, maybe a little better than that, I didn't work 7 days a week!
 
Ok. 20 working days per month makes 5 VCR's per day, which is even
more impressive.
 
>for warranty service. We had 3 big box retailers we did, warranty and
>contract repairs for. Remember those service contracts sold by the
>stores? Did great for the stores and me!
 
When I was going to college in the late 1960's, one of my assorted
part time jobs was working at the local electronics repair shop.
Officially, it was a camera repair shop. However, the owner
negotiated a deal to handle warranty service for Concord Electronics,
which imported Japanese cheap tape recorders. A shipment of maybe
2,000 recorders would arrive and the first think the factory did was
open the boxes and test them. It seems that there was zero testing at
the factory. We would get to fix and rework the failures. Since they
were mostly hand assembled at that point, the problems were easy to
spot consisting mostly of the usual parts in backwards, missing parts,
loose parts, and wrong parts. It was easy work and the margin was
great.
 
So, the owners negotiated similar warranty contracts with other
electronic importers. At various times, we had Sony (Superscope),
Akai, Roberts, Concord, Panasonic, and some others I can't recall.
Each company had its collection of problems. However, the work was
made more difficult by miserable packaging design and worthless
documentation. Each shipment was somewhat different from the previous
shipment as the factory made "improvements". Profits from the
warranty works was minimal, but necessary in order to get the much
more lucrative out of warranty repair work. Nobody sold service
contracts at the time.
 
Roll forward a few years and I'm now in the 2way radio biz billing by
time and materials. I go to the bank for a loan and they say that I
don't have a continuous income stream, which means I have to sell
service contracts in order to get a loan. So, I negotiate contracts
with my largest customers, only to find them now complaining about
literally everything possible. Instead of light erratic work and an
erratic income, I now had terminal over-work, but a steady income.
Oops. I eventually charged monthly for the contract and some amount
by the visit and by the radio. That worked.
 
Such service contracts are still with us today. One of my friends
destroyed her iPhone. She was paying Verizon for phone insurance.
When it came time to collect, she discovered that the deductible was
almost exactly the same as what it would cost to buy a "refurbished"
phone on eBay. Any semblance to a rip-off is not coincidental.
 
>percentage increased after a certain amount. Great incentive to get more
>work done. The independent contractor status probably would not have
>passed an IRS test, but I would not have changed it.
 
The shop where I worked was much the same way except we were all
students and therefore part time employees. My pay was set by a
rather complex formula that I never understood. Sometimes it was more
than I expected, other times less. At the time, I don't believe there
was such a thing as independent contractor. At least, I don't recall
it ever being mentioned. That came later, in the 1980's. As I
recall, I was getting about $0.50/hr after taxes.
 
>another $40 or $60 just because they already had $39 into it.
> Because I worked on the same models over and over, I was paid for my
>experience more than my time.
 
You were lucky that the factory didn't make drastic changed with every
shipment. I had to learn the machine over again with every shipment,
roughly once per month. Not knowing that this was not exactly normal
or optimum, I just accepted it and plodded forward.
 
> DVD player sales were coming on at the time VCR's prices were
>dropping, I thought about jumping into those, I'm glad I didn't, the
>prices for those dropped quick.
 
Good move. By this time, the manufacturers had cut the importers out
of the picture and were contracting with independent shops to see if
there was a market for after sales service. They would require the
shops to work for minimal profit, which was to be compensated by the
factory sending them all the out of warranty work. Between 1980 and
about 1995, that worked, because people genuinely expected products to
last 10+ years and were willing to pay for repair work. The
introduction of Chinese products wrecked that plan, where everything
is a throw away and the only need for repair service is to pretend to
deliver on their warranty obligations.
 
>> and unchecking "Insert Note into clean message (outgoing)".
 
> Ok, I did the latter, do I owe you a consultation fee, or do you
>owe me a psychiatric fee for easing your angst? :-)
 
More like an excavation and cleaning fee. Finding the proper setting
under 7 layers of menus was the difficult part. Sorry, but I won't be
paying a fee. Personal policy does not allow me to pay for either
physical or mental exercise. However, I would like to thank you for
improving the aesthetic quality of your postings by removing the
advertisement.
 
--
Jeff Liebermann jeffl@cruzio.com
150 Felker St #D http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558
ceg <curt.guldenschuh@gmail.com>: Aug 30 03:59AM

A THIN stylus for the iPad seems to cost over $75:
http://www.wacom.com/en-us/products/stylus/intuos-creative-stylus-2
http://www.adonit.net
 
Since a stylus should be pretty simple sans moving parts, how does it
work and, more importantly, can we craft one out of readily available
materials that has a thin (pen-like) point?
MJC <gravity@mjcoon.plus.com>: Aug 30 11:57AM +0100

In article <mrtv37$srq$3@news.mixmin.net>, curt.guldenschuh@gmail.com
says...
 
> Since a stylus should be pretty simple sans moving parts, how does it
> work and, more importantly, can we craft one out of readily available
> materials that has a thin (pen-like) point?
 
Surely Apple users are not meant to be concerned about cost?
 
Mike.
N_Cook <diverse@tcp.co.uk>: Aug 30 12:28PM +0100

On 30/08/2015 04:59, ceg wrote:
 
> Since a stylus should be pretty simple sans moving parts, how does it
> work and, more importantly, can we craft one out of readily available
> materials that has a thin (pen-like) point?
 
Cactus thorns were used for gramophone pickup needls at one time,
probably tough enough, but not so hard to score boro-silicate glass
perhaps. So for a really "green" eco-product line , go for a cactus
thorn glued with pine resin into a swan quill. 80 dollars anyone?
that'll do nicely
amdx <nojunk@knology.net>: Aug 30 09:03AM -0500

On 8/30/2015 5:57 AM, MJC wrote:
>> materials that has a thin (pen-like) point?
 
> Surely Apple users are not meant to be concerned about cost?
 
> Mike.
 
I don't think scorn of Apple users is acceptable in these PC times.
Wait a few years, maybe we can rid of some of the BullS%^t Political
Correctness.
Can't even have Taco night at the frat house without being called racist.
Paraphrase of a Greg Gutfeld line.
 
Mikek
MJC <gravity@mjcoon.plus.com>: Aug 30 03:50PM +0100

In article <mrv2c1$510$1@dont-email.me>, nojunk@knology.net says...
 
> > Surely Apple users are not meant to be concerned about cost?
 
> > Mike.
 
> I don't think scorn of Apple users is acceptable in these PC times.
 
Since my thrust was that Apple users (purchasers) are well off, it is
more a matter of envy than scorn...
 
Mike.
ceg <curt.guldenschuh@gmail.com>: Aug 30 03:35PM

On Sun, 30 Aug 2015 12:28:05 +0100, N_Cook wrote:
 
> perhaps. So for a really "green" eco-product line , go for a cactus
> thorn glued with pine resin into a swan quill. 80 dollars anyone?
> that'll do nicely
 
Does cactus thorn have the capacitive effect that is required?
ceg <curt.guldenschuh@gmail.com>: Aug 30 03:36PM

On Sun, 30 Aug 2015 15:50:12 +0100, MJC wrote:
 
> Since my thrust was that Apple users (purchasers) are well off, it is
> more a matter of envy than scorn...
 
Mostly I'm asking how the stylus works.
 
Like, why doesn't a pencil work?
Why doesn't a q-tip work?
 
What's a stylus do that a finger does but that a paperclip doesn't do?
Tim Schwartz <tim@bristolnj.com>: Aug 30 08:08AM -0400

On 8/28/2015 1:53 PM, Bill Sudbrink wrote:
> scam?
 
> Thanks,
> Bill Sudbrink
 
Bill,
 
Have you tried www.Newark.com? I believe that Newark Electronics is a
full line Bud distributor.
 
Regards,
Tim
N_Cook <diverse@tcp.co.uk>: Aug 30 10:57AM +0100

no bad ESR'd electros found. 2 bad spade cons on the A channel. All TO3
bolts needed tightening, 2 on different TO3 about 1/2 turn loose.
Perhaps that and cleaning/reseating opamps will have trapped the
problem. Reassemble and powerup again and see.
micky <NONONOmisc07@bigfoot.com>: Aug 29 07:28PM -0400

In sci.electronics.repair, on Thu, 27 Aug 2015 13:29:15 -0700, Jeff
>2. The two antennas are for different frequency bands, such as VHF
>and UHF. You'll need a diplexer to do that, not a combiner.
><https://www.google.com/search?q=vhf+uhf+tv+diplexer&tbm=isch>
 
I've been thinking about this. Don't the inputs for a diplexer have to
be in different frequency bands? Since I have two TV antennas,
they'll be the same frequencies.
 
And if the "satellite" input filters out some frequencies, what
expectation do I have that they will be the frequencies from Baltimore
(nearby)? Instead it might be filtering out the very DC stations I
wanted the big attic antenna to get?
 
Also, after some frequencies are filtered out and some are left, will
my DVDR, which expects input from an antenna, not a satellite, be able
to interpret what does pass through the "satellite" half of the
diplexer?
 
 
>I suggest you get rid of the two antenna scheme and combiner for now
>and see if one antenna works better. Also, you can make it work with
>an RF switch between antennas, which admitttedly isn't convenient.
 
Right. It won't work because I watch mostly that which I record, so
there's no one at home to flip the switch from one antenna to another.
 
 
You received this digest because you're subscribed to updates for this group. You can change your settings on the group membership page.
To unsubscribe from this group and stop receiving emails from it send an email to sci.electronics.repair+unsubscribe@googlegroups.com.

Digest for sci.electronics.repair@googlegroups.com - 15 updates in 6 topics

bleachbot <bleachbot@httrack.com>: Aug 29 05:42PM +0200

cartermath17@gmail.com: Aug 29 08:41AM -0700

[SOLUTIONS MANUAL]2500 Solved Problems in Fluid Mechanics & Hydraulics Schaums ContactEmail: cartermath(@)gmail( dot )com ; Evett, cheng Liu
[SOLUTIONS MANUAL]A Brief Introduction To Fluid Mechanics, 5th Edition ContactEmail: cartermath(@)gmail( dot )com ; Donald F. Young, Bruce R. Munson, Theodore H. Okiishi and Wade W. Huebsch
[SOLUTIONS MANUAL]A Course in Modern Mathematical Physics ContactEmail: cartermath(@)gmail( dot )com ; Peter Szekeres
[SOLUTIONS MANUAL]A Course in Ordinary Differential Equations ContactEmail: cartermath(@)gmail( dot )com ; Swift, Wirkus
[SOLUTIONS MANUAL]A First Course in Abstract Algebra (7th Ed., John B. Fraleigh)
[SOLUTIONS MANUAL]A First Course in Differential Equations - The Classic Fifth Edition ContactEmail: cartermath(@)gmail( dot )com ; Zill, Dennis G
[SOLUTIONS MANUAL]A First Course in Differential Equations, 9th Ed ContactEmail: cartermath(@)gmail( dot )com ; Dennis G. Zill
[SOLUTIONS MANUAL]A First Course In Probability 7th Edition ContactEmail: cartermath(@)gmail( dot )com ; Sheldon M. Ross
[SOLUTIONS MANUAL]A First Course in Probability Theory, 6th edition, ContactEmail: cartermath(@)gmail( dot )com ; S. Ross.
[SOLUTIONS MANUAL]A First Course in String Theory, 2004, Barton Zwiebach
[SOLUTIONS MANUAL]A First Course in the Finite Element Method, 4th Edition logan
[SOLUTIONS MANUAL]A First Course in the Finite Element Method, 5th Edition ContactEmail: cartermath(@)gmail( dot )com ; logan
[SOLUTIONS MANUAL]A Practical Introduction to Data Structures and Algorithm Analysis 2Ed ContactEmail: cartermath(@)gmail( dot )com ; Shaffer
[SOLUTIONS MANUAL]A Quantum Approach to Condensed Matter Physics (Philip L. Taylor & Olle Heinonen)
[SOLUTIONS MANUAL]A Short Course in General Relativity 2e ContactEmail: cartermath(@)gmail( dot )com ; J. Foster and J. D. Nightingale
[SOLUTIONS MANUAL]A Short Introduction to Quantum Information and Quantum Computation ContactEmail: cartermath(@)gmail( dot )com ; Michel Le Bellac
[SOLUTIONS MANUAL]A Transition to Advanced Mathematics 5th E ContactEmail: cartermath(@)gmail( dot )com ; Smith, Eggen, Andre
[SOLUTIONS MANUAL]Accounting Information Systems 12th Edition ContactEmail: cartermath(@)gmail( dot )com ; Romney, Steinbart
[SOLUTIONS MANUAL]Accounting Principles 8e ContactEmail: cartermath(@)gmail( dot )com ; Kieso, Kimmel
[SOLUTIONS MANUAL]Accounting principles 8th Ed ContactEmail: cartermath(@)gmail( dot )com ; Weygandt
[SOLUTIONS MANUAL]Accounting, 23 Ed ContactEmail: cartermath(@)gmail( dot )com ; Carl S. Warren, James M. Reeve, Jonathan Duchac
[SOLUTIONS MANUAL]Accounting,8th Ed ContactEmail: cartermath(@)gmail( dot )com ; Horngren,Harrison, Oliver
[SOLUTIONS MANUAL]Actuarial Mathematics for Life Contingent Risks ContactEmail: cartermath(@)gmail( dot )com ; Dickson, Hardy and Waters
[SOLUTIONS MANUAL]Adaptive Control, 2nd. Ed., ContactEmail: cartermath(@)gmail( dot )com ; Astrom, Wittenmark
[SOLUTIONS MANUAL]Adaptive Filter Theory (4th Ed., Simon Haykin)
[SOLUTIONS MANUAL]Advanced Accounting 10E international ED ContactEmail: cartermath(@)gmail( dot )com ; Beams , Clement, Anthony, Lowensohn
[SOLUTIONS MANUAL]Advanced Accounting 10th ED ContactEmail: cartermath(@)gmail( dot )com ; Fischer, Cheng, Taylor
[SOLUTIONS MANUAL]Advanced accounting 9th Ed ContactEmail: cartermath(@)gmail( dot )com ; Hoyle, Schaefer
[SOLUTIONS MANUAL]Advanced Accounting Vol 2 ( 2006 ) ContactEmail: cartermath(@)gmail( dot )com ; Baysa, Lupisan
[SOLUTIONS MANUAL]Advanced Calculus Gerald B. Folland
[SOLUTIONS MANUAL]Advanced Digital Design with the Verilog HDL ContactEmail: cartermath(@)gmail( dot )com ; Michael D. Ciletti
[SOLUTIONS MANUAL]Advanced Dynamics (Greenwood)
[SOLUTIONS MANUAL]Advanced Engineering Electromagnetics ContactEmail: cartermath(@)gmail( dot )com ; Constantine A. Balanis
[SOLUTIONS MANUAL]Advanced Engineering Mathematics 2nd Edition ContactEmail: cartermath(@)gmail( dot )com ; Michael D. Greenberg
[SOLUTIONS MANUAL]Advanced Engineering Mathematics 3rd ed zill
[SOLUTIONS MANUAL]Advanced Engineering Mathematics 8Ed Erwin Kreyszig
[SOLUTIONS MANUAL]Advanced Engineering Mathematics ContactEmail: cartermath(@)gmail( dot )com ; Erwin Kreyszig, 9th ed
[SOLUTIONS MANUAL]Advanced Engineering Mathematics, 6th Edition ContactEmail: cartermath(@)gmail( dot )com ; Peter V. O'Neil
[SOLUTIONS MANUAL]Advanced Engineering Mathematics, 7th Ed ContactEmail: cartermath(@)gmail( dot )com ; Peter V. O'Neil
[SOLUTIONS MANUAL]Advanced Engineering Mathematics,2E, ContactEmail: cartermath(@)gmail( dot )com ; Zill, Cullen
[SOLUTIONS MANUAL]Advanced Engineering Thermodynamics, 3rd Edition ContactEmail: cartermath(@)gmail( dot )com ; Adrian Bejan
[SOLUTIONS MANUAL]Advanced Financial Accounting ContactEmail: cartermath(@)gmail( dot )com ; Baker
[SOLUTIONS MANUAL]Advanced Financial Accounting 5 Ed ContactEmail: cartermath(@)gmail( dot )com ; Baker
[SOLUTIONS MANUAL]Advanced Financial Accounting 8 Ed ContactEmail: cartermath(@)gmail( dot )com ; Baker
[SOLUTIONS MANUAL]Advanced Functions & Introductory Calculus ContactEmail: cartermath(@)gmail( dot )com ; Kirkpatrick, McLeish, Montesanto
[SOLUTIONS MANUAL]Advanced Industrial Economics ContactEmail: cartermath(@)gmail( dot )com ; Martin
[SOLUTIONS MANUAL]Advanced Industrial Economics, 2nd ED Stephen Martin
[SOLUTIONS MANUAL]Advanced Macroeconomics 2nd edition ContactEmail: cartermath(@)gmail( dot )com ; David Romer
[SOLUTIONS MANUAL]Advanced Macroeconomics, ContactEmail: cartermath(@)gmail( dot )com ; David Romer
[SOLUTIONS MANUAL]Advanced Mathematical Concepts Precalculus with Applications ( Glencoe )
[SOLUTIONS MANUAL]Advanced Mechanics of Materials 6th ed ContactEmail: cartermath(@)gmail( dot )com ; Boresi, Schmidt
[SOLUTIONS MANUAL]Advanced Modern Engineering Mathematics 3rd Ed Glyn James
[SOLUTIONS MANUAL]Advanced Modern Engineering Mathematics 4th Ed Glyn James
[SOLUTIONS MANUAL]Advanced Modern Engineering Mathematics, 3rd Ed., ContactEmail: cartermath(@)gmail( dot )com ; G. James
[SOLUTIONS MANUAL]Advanced Organic Chemistry Part A- Structure and Mechanisms 5th E ContactEmail: cartermath(@)gmail( dot )com ; Carey, Sundberg
[SOLUTIONS MANUAL]Aircraft Structures for Engineering Students (4th Ed., T.H.G. Megson)
[SOLUTIONS MANUAL]Algebra & Trigonometry and Precalculus, 3rd Ed ContactEmail: cartermath(@)gmail( dot )com ; Beecher, Penna, Bittinger
[SOLUTIONS MANUAL]Algebra Baldor
[SOLUTIONS MANUAL]Algebra- ContactEmail: cartermath(@)gmail( dot )com ; Thomas W. Hungerford
[SOLUTIONS MANUAL]Algorithm Design (Jon Kleinberg & Éva Tardos)
[SOLUTIONS MANUAL]An Interactive Introduction to Mathematical Analysis 2nd E (Jonathan Lewin)
[SOLUTIONS MANUAL]An Introduction To Analysis (3rdEd) - ContactEmail: cartermath(@)gmail( dot )com ; William Wade
[SOLUTIONS MANUAL]An Introduction To Analysis 4th Ed ContactEmail: cartermath(@)gmail( dot )com ; William Wade
[SOLUTIONS MANUAL]An Introduction to Analysis of Financial Data with R ContactEmail: cartermath(@)gmail( dot )com ; Ruey S. Tsay
[SOLUTIONS MANUAL]An Introduction to Database Systems (8th Ed., C.J. Date)
[SOLUTIONS MANUAL]An Introduction to Derivatives and Risk Management ContactEmail: cartermath(@)gmail( dot )com ; chance, brooks
[SOLUTIONS MANUAL]An Introduction to Economic Dynamics ContactEmail: cartermath(@)gmail( dot )com ; Ronald Shone
[SOLUTIONS MANUAL]An Introduction To Management Science Quantitative Approaches To Decision Making 12th Ed ContactEmail: cartermath(@)gmail( dot )com ; Anderson, Sweeney
[SOLUTIONS MANUAL]An Introduction to Modern Astrophysics (2nd Ed., Bradley W. Carroll & Dale A. Ostlie)
[SOLUTIONS MANUAL]An Introduction to Numerical Analysis ContactEmail: cartermath(@)gmail( dot )com ; Endre Süli,David F. Mayers
[SOLUTIONS MANUAL]An Introduction to Ordinary Differential Equations (James C. Robinson)
[SOLUTIONS MANUAL]An Introduction to Signals and Systems ContactEmail: cartermath(@)gmail( dot )com ; John Stuller
[SOLUTIONS MANUAL]An Introduction to Stochastic Modeling 3rd Ed ContactEmail: cartermath(@)gmail( dot )com ; Taylor, Karlin
[SOLUTIONS MANUAL]An Introduction to the Finite Element Method (3rd Ed., J. N. Reddy)
[SOLUTIONS MANUAL]An Introduction To The Mathematics Of Financial Derivatives 2nd E ContactEmail: cartermath(@)gmail( dot )com ; Mitch Warachka, Hogan, Neftci
[SOLUTIONS MANUAL]An Introduction to Thermal Physics ContactEmail: cartermath(@)gmail( dot )com ; Schroeder, Daniel V
[SOLUTIONS MANUAL]An Introduction to Thermodynamics and Statistical Mechanics (2nd Ed, Keith Stowe)
[SOLUTIONS MANUAL]An Introduction to Wavelets through Linear Algebra ContactEmail: cartermath(@)gmail( dot )com ; Frazier
[SOLUTIONS MANUAL]Analog Integrated Circuit Design, ContactEmail: cartermath(@)gmail( dot )com ; Johns, Martin
[SOLUTIONS MANUAL]Analysis and Design of Analog Integrated Circuits (4th Edition) ContactEmail: cartermath(@)gmail( dot )com ; Gray , Lewis , Meyer
[SOLUTIONS MANUAL]Analysis and Design of Analog Integrated Circuits 5th Ed ( vol.1 ) ch1-4 ContactEmail: cartermath(@)gmail( dot )com ; Gray, Meyer
[SOLUTIONS MANUAL]Analysis of Financial Time Series, 3rd Ed ContactEmail: cartermath(@)gmail( dot )com ; Ruey S. Tsay
[SOLUTIONS MANUAL]Analysis of Transport Phenomena, W. Deen
[SOLUTIONS MANUAL]Analysis With an Introduction to Proof 4th Ed ContactEmail: cartermath(@)gmail( dot )com ; Steven R. Lay
[SOLUTIONS MANUAL]Analysis, Synthesis,and Design of Chemical Processes 3rd ED ContactEmail: cartermath(@)gmail( dot )com ; Turton, Shaeiwitz
[SOLUTIONS MANUAL]Analytical Chemistry, Higson
[SOLUTIONS MANUAL]Analytical Mechanics 7E ContactEmail: cartermath(@)gmail( dot )com ; Grant R. Fowles, George L. Cassiday
[SOLUTIONS MANUAL]Antenna Theory 2nd edition ContactEmail: cartermath(@)gmail( dot )com ; Balanis
[SOLUTIONS MANUAL]Antenna Theory and Design, 2nd Ed Vol.1 ContactEmail: cartermath(@)gmail( dot )com ; Stutzman, Thiele
[SOLUTIONS MANUAL]Antennas for All Applications (3rd Ed., John Kraus & Ronald Marhefka)
[SOLUTIONS MANUAL]Applied Analyses in Geotechnics ContactEmail: cartermath(@)gmail( dot )com ; Fethi Azizi
[SOLUTIONS MANUAL]Applied Calculus ContactEmail: cartermath(@)gmail( dot )com ; Hallett,Gleason, Lock, Flath
[SOLUTIONS MANUAL]Applied Calculus for the Managerial, Life, and Social Sciences, 7 E, ContactEmail: cartermath(@)gmail( dot )com ; Soo T. Tan
[SOLUTIONS MANUAL]Applied Calculus for the Managerial, Life, and Social Sciences, 8 E, ContactEmail: cartermath(@)gmail( dot )com ; Soo T. Tan
[SOLUTIONS MANUAL]Applied Econometric Time Series, 2nd Edition ContactEmail: cartermath(@)gmail( dot )com ; Enders
[SOLUTIONS MANUAL]Applied Econometric Times Series, 3rd Edition ContactEmail: cartermath(@)gmail( dot )com ; Walter Enders
[SOLUTIONS MANUAL]Applied Electromagnetism 2nd Ed ContactEmail: cartermath(@)gmail( dot )com ; Shen, Huang
[SOLUTIONS MANUAL]Applied Finite Element Analysis 2ed, ContactEmail: cartermath(@)gmail( dot )com ; LJ SEGERLIND
[SOLUTIONS MANUAL]Applied Fluid Mechanics (6th Ed., Mott)
[SOLUTIONS MANUAL]Applied Linear Algebra ContactEmail: cartermath(@)gmail( dot )com ; Olver, Shakiban
[SOLUTIONS MANUAL]Applied Linear Regression 3rd Ed ContactEmail: cartermath(@)gmail( dot )com ; Sanford Weisberg
[SOLUTIONS MANUAL]Applied Linear Statistical Models 5th Ed ContactEmail: cartermath(@)gmail( dot )com ; Kutner, Nachtsheim
[SOLUTIONS MANUAL]Applied Mathematics, 3rd Ed ContactEmail: cartermath(@)gmail( dot )com ; J. David Logan
[SOLUTIONS MANUAL]Applied Numerical Analysis, 7th Edition, ContactEmail: cartermath(@)gmail( dot )com ; Gerald, Wheatley
[SOLUTIONS MANUAL]Applied Numerical Methods with MATLAB for Engineers and Scientists 2nd E ContactEmail: cartermath(@)gmail( dot )com ; Chapra
[SOLUTIONS MANUAL]Applied Numerical Methods with MATLAB for Engineers and Scientists( Steven C. Chapra)
[SOLUTIONS MANUAL]Applied Partial Differential Equations (4th Ed., Haberman)
[SOLUTIONS MANUAL]Applied Partial Differential Equations ContactEmail: cartermath(@)gmail( dot )com ; J. David Logan
[SOLUTIONS MANUAL]Applied Quantum Mechanics ( A. F. J. Levi )
[SOLUTIONS MANUAL]Applied Statistics and Probability for Engineers ( 2nd Ed., Douglas Montgomery & George Runger )
[SOLUTIONS MANUAL]Applied Statistics and Probability for Engineers (3rd Ed., Douglas Montgomery & George Runger)
[SOLUTIONS MANUAL]Applied Statistics and Probability for Engineers 6th Ed ContactEmail: cartermath(@)gmail( dot )com ; Montgomery, Runger
[SOLUTIONS MANUAL]Applied Strength of Materials (4th Ed., Mott)
[SOLUTIONS MANUAL]Applied Strength of Materials (5th Ed., Mott)
[SOLUTIONS MANUAL]Applying Maths in the Chemical and Biomolecular Sciences, Beddard
[SOLUTIONS MANUAL]Artificial Intelligence A Modern Approach 2e ContactEmail: cartermath(@)gmail( dot )com ; Russell, Norvig
[SOLUTIONS MANUAL]Artificial Neural Networks ContactEmail: cartermath(@)gmail( dot )com ; B. Yegnanarayana and S. Ramesh
[SOLUTIONS MANUAL]Assembly Language for Intel-Based Computers ( 3rd Edition ) ContactEmail: cartermath(@)gmail( dot )com ; Kip R. Irvine
[SOLUTIONS MANUAL]Auditing and Assurance Services- An Integrated Approach 12E ContactEmail: cartermath(@)gmail( dot )com ; Arens
[SOLUTIONS MANUAL]Auditing and Assurance Services, 12th edition, Alvin A Arens, Randal J Elder, Mark Beasley
[SOLUTIONS MANUAL]Auditing and Assurance Services, 13 ed ContactEmail: cartermath(@)gmail( dot )com ; Arens, Elder, Beasley
[SOLUTIONS MANUAL]Auditing and Assurance Services, 2nd Ed ContactEmail: cartermath(@)gmail( dot )com ; Louwers
[SOLUTIONS MANUAL]Automatic Control Systems 9 Ed ContactEmail: cartermath(@)gmail( dot )com ; Kuo, Golnaraghi
[SOLUTIONS MANUAL]Automatic Control Systems, 8E, ContactEmail: cartermath(@)gmail( dot )com ; Kuo, Golnaraghi
[SOLUTIONS MANUAL]Automation, Production Systems, and Computer Integrated Manufacturing 3rd ED ContactEmail: cartermath(@)gmail( dot )com ; Mikell P. Groover
[SOLUTIONS MANUAL]Basic Econometrics 4 ed ContactEmail: cartermath(@)gmail( dot )com ; Damodar N. Gujarati
[SOLUTIONS MANUAL]Basic Electrical Engineering ContactEmail: cartermath(@)gmail( dot )com ; Nagrath, D P Kothari
[SOLUTIONS MANUAL]Basic Electromagnetics with Applications ContactEmail: cartermath(@)gmail( dot )com ; Nannapaneni Narayana Rao
[SOLUTIONS MANUAL]Basic Engineering Circuit Analysis, 7th Ed ContactEmail: cartermath(@)gmail( dot )com ; David Irwin
[SOLUTIONS MANUAL]Basic Engineering Circuit Analysis, 8th Edition ContactEmail: cartermath(@)gmail( dot )com ; J. David Irwin, R. Mark Nelms
[SOLUTIONS MANUAL]Basic Engineering Circuit Analysis, 9th Ed ContactEmail: cartermath(@)gmail( dot )com ; Irwin, Nelms
[SOLUTIONS MANUAL]Basic Engineering Mathematics ContactEmail: cartermath(@)gmail( dot )com ; Chan, Hung
[SOLUTIONS MANUAL]Basic Heat and Mass Transfer ContactEmail: cartermath(@)gmail( dot )com ; A. F. Mills
[SOLUTIONS MANUAL]Basic
Bill Sudbrink <bill@umsa7.ums.edu>: Aug 28 05:56PM

>do with a JW-3203, JW-3204 or JW-3205. If you have one or more to
>sell, please email:
 
>8bill8 at umsa7 dot umd dot edu
 
I forgot to add, remove the "eight" digits and translate "dot"s and
"at"s.
 
Bill Sudbrink <bill@umsa7.ums.edu>: Aug 28 05:53PM

Hi,
 
I need a few BUD Industries JW-3202 series enclosures. I could make
do with a JW-3203, JW-3204 or JW-3205. If you have one or more to
sell, please email:
 
8bill8 at umsa7 dot umd dot edu
 
By the way, what is with these web sites that offer available stock
of parts and components (there are a couple of sites that offer these
enclosures) but ignore requests for quotes? Are they just not interested
unless you want to buy their whole inventory? Are they some sort of
scam?
 
Thanks,
Bill Sudbrink
Allodoxaphobia <knock_yourself_out@example.net>: Aug 28 07:12PM

On Fri, 28 Aug 2015 17:56:51 +0000 (UTC), Bill Sudbrink wrote:
 
>>8bill8 at umsa7 dot umd dot edu
 
> I forgot to add, remove the "eight" digits and
> translate "dot"s and "at"s.
 
Wll, yah! That was obvious from the true rendereing
of your From: header in the posting.
amdx <nojunk@knology.net>: Aug 29 10:11AM -0500

On 8/28/2015 2:12 PM, Allodoxaphobia wrote:
>> translate "dot"s and "at"s.
 
> Well, yah! That was obvious from the true rendering
> of your From: header in the posting.
 
Not a true rendering note, umd vs ums.
 
Mikek
 
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
N_Cook <diverse@tcp.co.uk>: Aug 29 08:24AM +0100

Unused for a year and then switching on , nasty magnetisation type noise
and "B" 1.2 amp thermal breaker trips out.
This disengages mains Tx secondary middle from ground , via a triac
system crowbar fashion.
Selecting DDT disabled, then amp runs ok. I tried running on a variac at
60% mains, with DDT enabled , to see if it would run and then probe
difference between A and B channels. Ran ok,so turned up variac
progressively, but now even at 100% , amp runs normally.
So presumably a cap somewhere got reformed, how to track down which one?
Other than ESR meter on caps/replacing all,probing for A/B differences,
anyone aware of where a failing cap or more generally zener , opamp or
whatever may lie, in the DDT processing section?
Phil Allison <pallison49@gmail.com>: Aug 29 02:33AM -0700

N_Cook wrote:
> and "B" 1.2 amp thermal breaker trips out.
> This disengages mains Tx secondary middle from ground , via a triac
> system crowbar fashion.
 
 
** Nonsense - the triacs are used in a speaker protection crow bar.
 
The power amps use PSU centre taps as speaker outputs - like some QSC amps.
 
 
> Other than ESR meter on caps/replacing all,probing for A/B differences,
> anyone aware of where a failing cap or more generally zener , opamp or
> whatever may lie, in the DDT processing section?
 
** What happened is that ch B produced a large DC offset when switched on, probably due to bad contacts on the many push fit connectors OR maybe a leaky coupling electro somewhere - THEN the triac crow bar activated and shorted the output.
 
 
... Phil
Michael Black <et472@ncf.ca>: Aug 28 01:17PM -0400

"dusty" <dusty@dot.com>: Aug 28 01:07PM -0500

> There are even DTV converters that have HDMI outputs, they even allow
> recording if you attach a USB flash drive to them.
> Michael
 
That's a great suggestion.
Thank you
Jeff Liebermann <jeffl@cruzio.com>: Aug 28 01:51PM -0700


>32 inch Insignia flat screen TV.
 
I guess it doesn't have a model number. Could you be a little less
vague?
 
>My big feet tripped over the antenna cable, ripping out
>the input where the cable screws on.
 
Next time, use a push on F connector or adapter. It's a common
problem. Power cords and phono jacks are protected by easily
disconnecting.
<https://www.google.com/search?q=push+on+f+connector+adapter&tbm=isch>
 
>I attached a link to some pictures.
>https://www.dropbox.com/sh/610z20tqny4wocy/AABqKX-ycqKAAsRqYXoykuVEa?dl=0
>Thanks for any information.
 
I think anyone that knows which end of the soldering iron to grap can
probably put Humpty Dumpty back together again. It's mostly a matter
of your carrying the TV to the repair person or shop, removing the
shield can, doing whatever it takes to resolder the connector, putting
it back together, and check for other common problems (i.e. bulging
caps). I would guess about 30-45 mins work and testing, assuming you
don't need any other repairs. All your photos are out of focus and
too far away, so I can't be more specific. Looks like the center pad
might have ripped off, so there will be some PCB trace work involved.
For cost, just ask for how much shop time costs.
--
Jeff Liebermann jeffl@cruzio.com
150 Felker St #D http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558
"dusty" <dusty@dot.com>: Aug 28 06:00PM -0500

> >32 inch Insignia flat screen TV.
> I guess it doesn't have a model number. Could you be a little less
> vague?
 
model # NS-L32Q-10A
 
> too far away, so I can't be more specific. Looks like the center pad
> might have ripped off, so there will be some PCB trace work involved.
> For cost, just ask for how much shop time costs.
 
Inside the shiny square box, where the connector is ripped out,
the small circuit board is broken in several places. Sorry the
pictures weren't better. I'll call around and see if someone can
fix it. I wouldn't be surprised if I have to drive 100 miles to find
someone who can fix it.
 
Those slip on connectors are a good idea.
 
 
--
Usenet Reader for Android
http://android.newsgroupstats.hk
Jeff Liebermann <jeffl@cruzio.com>: Aug 28 04:39PM -0700

>> I guess it doesn't have a model number. Could you be a little less
>> vague?
 
>model # NS-L32Q-10A
 
You can buy the tuner can and just drop (or solder) it in place.
Search eBay and other sources for the number on the tuner.
 
Or, just replace the entire board:
<http://www.ebay.com/itm/like/371414946277>
<http://www.ebay.com/itm/like/281659047280>
or others for more money.
 
>Inside the shiny square box, where the connector is ripped out,
>the small circuit board is broken in several places. Sorry the
>pictures weren't better.
 
If the board is cracked, it might be possible to epoxy it back
together, and solder the traces back together. However, if the traces
and cracks extend under components, there may be othe damage. Since
this might easily be a waste of time, it's probably best to replace
the tuner can, or the entire board.
 
>I'll call around and see if someone can
>fix it. I wouldn't be surprised if I have to drive 100 miles to find
>someone who can fix it.
 
Have the replacement main board shipped to you via UPS, USPS, Fedex,
etc. Much easier than driving 100 miles. I don't think there will be
any soldering if your replace the entire main board. Just connector
juggling. Be sure to take a photo of what it looks like before you
start as mixing up connectors, shields, brackets, and hardware is not
a good idea.
 
>Those slip on connectors are a good idea.
 
Yep. I wish they made something similar for RJ45 (ethernet)
connectors. Good luck with the repair.
 
--
Jeff Liebermann jeffl@cruzio.com
150 Felker St #D http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558
"dusty" <dusty@dot.com>: Aug 29 02:05AM -0500

> 150 Felker St #D http://www.LearnByDestroying.com
> Santa Cruz CA 95060 http://802.11junk.com
> Skype: JeffLiebermann AE6KS 831-336-2558
 
wow, eBay has everything. I'll order a board after I check the
exact part number I need. I ordered some slip connectors.
You've helped me a lot, I appreciate it very much.
 
Thank you
Dusty
Cydrome Leader <presence@MUNGEpanix.com>: Aug 28 06:51PM


> ** There are certainly many SMPSs with start up modes that create brutal current surges for the switching mosfet or mosfets. The electros on the secondary side of the switching tranny present a near short until charged and there has to be some effective means built into the circuitry to limit peak currents until this happens.
 
> Using a variac, it is sometimes possible to find a setting where the PSU attempts to start, surges repeatedly, but cannot successfully run - likely because the secondary voltage does not rise enough for the control loop to stabilise.
 
> Reckon it is wise to avoid lingering at such a setting.
 
Television sets (with CRT) really don't like brownouts either.
You received this digest because you're subscribed to updates for this group. You can change your settings on the group membership page.
To unsubscribe from this group and stop receiving emails from it send an email to sci.electronics.repair+unsubscribe@googlegroups.com.