sci.electronics.repair - 19 new messages in 10 topics - digest

sci.electronics.repair
http://groups.google.com/group/sci.electronics.repair?hl=en

sci.electronics.repair@googlegroups.com

Today's topics:

==============================================================================
TOPIC: Need to buy a long Phillips no. 1 screwdriver
http://groups.google.com/group/sci.electronics.repair/t/105a0819a4728e8c?hl=en
==============================================================================

== 1 of 2 ==
Date: Tues, Nov 2 2010 11:53 pm
From: "Ron D."

#1 7.8" shank: http://www.wihatools.com/100seri/153serie.htm

== 2 of 2 ==
Date: Wed, Nov 3 2010 5:59 pm
From: Jeff Liebermann

On Tue, 2 Nov 2010 09:15:37 +0000 (UTC), "Geoffrey S. Mendelson"
<gsm@mendelson.com> wrote:

>Philips with one L is the name of the Dutch Company, Koninklijke
>Philips Electronics N.V.
>Geoff.

Ooops. Instead of looking it up, I guessed, and lost. Sorry(tm).

--
# Jeff Liebermann 150 Felker St #D Santa Cruz CA 95060
# 831-336-2558
# http://802.11junk.com jeffl@cruzio.com
# http://www.LearnByDestroying.com AE6KS

==============================================================================
TOPIC: Zeners in series
http://groups.google.com/group/sci.electronics.repair/t/aac92dec501a08cb?hl=en
==============================================================================

== 1 of 1 ==
Date: Wed, Nov 3 2010 1:28 am
From: isw

In article <Xns9E246B89E13D6damon161attbicom@127.0.0.1>,
Damon Hill <damon1SIX1@comcast.netnet> wrote:

> isw <isw@witzend.com> wrote in
> news:isw-F4887F.00161102112010@[216.168.3.50]:
>
> > In article <Xns9E23EA8D25BB7damon161attbicom@127.0.0.1>,
> > Damon Hill <damon1SIX1@comcast.netnet> wrote:
>
> >> Don't forward-biased silicon diodes have a tempco reverse that of
> >> a zener diode? If I want a temperature-compensated 40VDC, I could
> >> combine a 39 volt zener and a diode or two and get very close to
> >> 40 volts with minimum drift.
> >
> > There's a natural "turnover point" at something about 5.6 volts for
> > reverse-biased diode junctions. For breakovers below that voltage, the
> > Zener effect predominates, and the devices exhibit a negative tempco.
> > Above it, the avalanche effect becomes predominant, with a positive
> > tempco. Right around 5.6 volts, the tempco can be very near to zero.
> > You can make composite devices with very low tempco for voltages well
> > above 5.6 devices by putting one (or more) of each type in series.
> >
> > So if you wanted, say, a 40volt stable reference, you'd probably get
> > best performance by putting (say) a 36 volt device and a 4 volt device
> > in series -- or maybe 37 volts and 3 volts; check the tempco curves.
> > And be sure to thermally connect the two devices together.
>
> Aha! I'd wondered why that trick wasn't used more often in an
> integrated package. Thanks for the explanation.

While we're talking about stable references, the way to get a
low-voltage one (2 volts, say), is to thermally tie together 20 volt and
22 volt devices and take the difference between them as the reference.
The two devices (Which should be from the same manufacturer, etc.) will
drift together, leaving a constant difference.

Or, you could just use an LM-10...

Isaac

==============================================================================
TOPIC: `****HOT SEXY PHOTOS&VIDEOS****
http://groups.google.com/group/sci.electronics.repair/t/d64731f76cd88865?hl=en
==============================================================================

== 1 of 1 ==
Date: Wed, Nov 3 2010 2:48 am
From: SRAVANTHI LOVE

==============================================================================
TOPIC: Fluke 8842A ROM binary
http://groups.google.com/group/sci.electronics.repair/t/1124840366b02993?hl=en
==============================================================================

== 1 of 2 ==
Date: Wed, Nov 3 2010 3:08 am
From: JW

On Tue, 2 Nov 2010 15:13:29 -0400 "tm" <the_obamunist@whitehouse.gov>
wrote in Message id: <iapnkc$hac$1@speranza.aioe.org>:

>
>"John Robertson" <spam@flippers.com> wrote in message
>news:q1too.1046$u9.530@edtnps82...
>> JW wrote:
>>> Hello,
>>>
>>> Looking for a Fluke 8842A ROM binary. Chip is a 2732A and is located in
>>> U222 near the input filter. It is a socketed part. This one is gone bad,
>>> and the A/D watchdog keeps resetting the micro. Tried a 8840A ROM, and
>>> while the meter comes up and runs, all the readings are high by order of
>>> 10. Reading the ROM using a variable voltage supply didn't get the job
>>> done, but interesting to note that that has worked at times in the past
>>> for me.
>>>
>>> Thanks for any help/leads.
>>>
>>> Jay
>>
>> If you get no help here you could try joining the Tech Tools mail list and
>> posting there. Email me for the link - a small group of video/pinball
>> techies that help each other out with test gear.
>>
>> I suspect there are Fluke forums out there though that might work better.
>>
>> I don't have the meter in question.
>>
>> John :-#)#
>
>Hello John,
>
>I am jumping in here to add to Jay's request. He is working on a 8842A. I
>have a 8842A/AC and sent him a copy of the ROM. Unfortunately, it did not
>work as mine was a different version. He sent me the code for the 8840A but
>it did not work either as the unit I have is the 8840A/AC.
>
>Bottom line is we are both looking for ROM images for different versions.
>You mentioned the tech group that may be of help. Could you let Jay or me
>know that info? My address is tmiller - at - skylinenet . net.

Hi Tom,

I just did a binary compare between the ROM that was in my 8842A and the
binary you sent me. They match. So it looks like my ROM is not bad, but
somebody has been screwing around in this unit before I got it. I suspect
that the micro-controller was swapped, and that the one that was put into
it is a incorrect version (It is marked V2.3)

The spare piggy-back Z8 I have lying around also has a V2.3 ROM installed
on it. If you can find a Z8 I could send you the matching 2.3 code that
goes into the 2732 chip, giving you both a U222 V2.3 and a micro version
2.3. If your meter begins working then that would go a long way in
figuring out whether the code in both chips must be the same revision.

== 2 of 2 ==
Date: Wed, Nov 3 2010 5:10 am
From: "tm"

"JW" <none@dev.null> wrote in message
news:j9c2d697mudgo5en57d6dkkf18gsbf1add@4ax.com...
> On Tue, 2 Nov 2010 15:13:29 -0400 "tm" <the_obamunist@whitehouse.gov>
> wrote in Message id: <iapnkc$hac$1@speranza.aioe.org>:
>
> Hi Tom,
>
> I just did a binary compare between the ROM that was in my 8842A and the
> binary you sent me. They match. So it looks like my ROM is not bad, but
> somebody has been screwing around in this unit before I got it. I suspect
> that the micro-controller was swapped, and that the one that was put into
> it is a incorrect version (It is marked V2.3)
>
> The spare piggy-back Z8 I have lying around also has a V2.3 ROM installed
> on it. If you can find a Z8 I could send you the matching 2.3 code that
> goes into the 2732 chip, giving you both a U222 V2.3 and a micro version
> 2.3. If your meter begins working then that would go a long way in
> figuring out whether the code in both chips must be the same revision.

Hi Jay,

I started a thread up on the Tekscopes group about this topic. You might hop
over there and add to the discussion. It seems there are several versions of
the Z-8 firmware and they don't match the EPROM versions.

Tom

==============================================================================
TOPIC: Specialised spring - make or mend?
http://groups.google.com/group/sci.electronics.repair/t/381236ff95a702b9?hl=en
==============================================================================

== 1 of 2 ==
Date: Wed, Nov 3 2010 1:08 am
From: "N_Cook"

mm <NOPSAMmm2005@bigfoot.com> wrote in message
news:ota1d6921ckqv0h73f1pldjpg9lbscjvtn@4ax.com...
> On Tue, 2 Nov 2010 16:23:53 -0000, "N_Cook" <diverse@tcp.co.uk> wrote:
>
> > Or learn to make a spring from scratch?
>
> You can buy spring wire at a hobby store. I don't know what they use
> it for, maybe to push airplane flaps back.
>
> The small diameters were under a dollar for 18 inches. I don't
> remember how thick they get.

I'll have a look around hobby and hardware places - I've never come across
it anywhere.

== 2 of 2 ==
Date: Wed, Nov 3 2010 4:58 am
From: "N_Cook"

Some valve retaining clip spring wire was the right 0.9mm diameter.
Interesting seeing the formed torsion spring unwind a bit in the heating
stress-relieving process. Hopefully my third attempt will work and not bind
on the turns area, got all the angles now and right mandrel but the turns
have to seat in a recessed and hidden hollow.

==============================================================================
TOPIC: Air Jordan CP3,Air Yeezy Man,J1+J2+J5+J7 Man,Jordan 3+Jordan 5+Jordan ..
..www.cntrade09.com
http://groups.google.com/group/sci.electronics.repair/t/0fb90033d544362d?hl=en
==============================================================================

== 1 of 1 ==
Date: Wed, Nov 3 2010 5:04 am
From: cntrade08

For more information, please contact Sophie,hotmail
Email:cntrade088@hotmail.com,

Minimum order is one,factory price also!Paypal payment free
shipping,ship time will take 4-7 working days.

Wholesale Nike Shoes,Jordan Shoes,Nike Dunk Shoes,Nike Air Force 1
Shoes,Nike Shox Shoes,
Nike Air Max,Brand Shoes Sell,cheap shoes wholesale,cheap dunk,shoes
wholesale,cheap air force 1 shoes,cheap jordan shoes,cheap hoodies
wholesale,cheap wholesale

Nike Jordan: www.cntrade09.com
Jordan 1,Jordan 1.5,Jordan 2,Jordan 2.5,Jordan 3,Jordan 3.5, Jordan
4,Jordan 4.5,Jordan 5.5 Man,Jordan 5,Jordan 6,J 6.5 Kid, Jordan
7,Jordan 7.5 Man,Jordan 8,Jordan 9,Jordan 9.5 Man,Jordan 10,Jordan
10.5,Jordan 11,Jordan 11.5,Jordan 12,Jordan 12.5,Jordan 13,Jordan
14,Jordan 15 Man,Jordan 15.5,Jordan 16, Jordan 17,Jordan 18,Jordan
19,Jordan 19.5,Jordan 22 Man,Jordan 22.5 Man,Jordan 23,Jordan 24.

Air Jordan CP3,Air Yeezy Man,J1+J2+J5+J7 Man,Jordan 3+Jordan 5+Jordan
15,Jordan 23+AF1,Jordan 3+AF1,Jordan 4+AF1,Jordan 4.5+AF1,Jordan
5+AF1,Jordan 6+AF1,Jordan 9+AF1,Jordan 9+Jordan 23 Man,Jordan
11.5+AF1,Jordan 11+AF1,Jordan 11+Anthony,Jordan 11+Jordan 12,Jordan
25
Kid,Jordan 11+Jordan 13,Jordan 11+Jordan 23,Jordan 11+Obama,Jordan
12+AF1,Jordan 13+AF1,Jordan 13+A J6 Rings,J18+J23 Man,Jordan
20+AF1,J21+J23 Man,Jordan 25+AF1,Jordan 6unite1,Jordan 8unite1,
Jordan flying Man,Jordan foamposite liite Man,Jordan MELO M5
Man,JORDAN TRUE FLIGHT Man,
Jordan Trunner Q4 Man,Jordan Michael Jackson shoes,Nike Air Michael
Jackson shoes,Nike Air skt shoes.
www.cntrade09.com

==============================================================================
TOPIC: Cheap Wholesale Armani Jeans GUCCI Jeans Levis Jeans (http://www.24
hoursneakers.com/) (PayPal Payment)
http://groups.google.com/group/sci.electronics.repair/t/b24b13d5b1df537a?hl=en
==============================================================================

== 1 of 1 ==
Date: Wed, Nov 3 2010 9:08 am
From: huang

Are you searching for good quality and low price products?our company
want to be you reliable supplier in china,we offer brand
shoes,bags,jeans,clothes,we accept a variety of payment
methods .Convenient for you the more you order the better price for
you! if you interested in our goods,pls don't hestate to contact me
Our website
(http://www.24hoursneakers.com/)
◥█▄▃▁
...◥█☆█▅▄▃▁▁▁▁▁▁▁▃▄▅︿@︿▅▄▁
〓▇████Free Ship Wholesale█████████████▅▄▃▁▁
〓〓〓█████████████

A&F Jeans Wholesale(http://www.24hoursneakers.com/) (PayPal
Payment)
BBC Jeans Wholesale(http://www.24hoursneakers.com/) (PayPal
Payment)
ED hardy Jeans Wholesale(http://www.24hoursneakers.com/) (PayPal
Payment)
G-Star Jeans Wholesale(http://www.24hoursneakers.com/) (PayPal
Payment)
Diesel Jeans Wholesale(http://www.24hoursneakers.com/) (PayPal
Payment)
Affliction Jeans Wholesale(http://www.24hoursneakers.com/)
(PayPal Payment)
artful dodger Jeans Wholesale(http://www.24hoursneakers.com/)
(PayPal Payment)
D&G Jeans Wholesale(http://www.24hoursneakers.com/) (PayPal
Payment)
COOGI Jeans Wholesale(http://www.24hoursneakers.com/) (PayPal
Payment)
JUSTcavalli Jeans Wholesale(http://www.24hoursneakers.com/)
(PayPal Payment)
VERSACE Jeans Wholesale(http://www.24hoursneakers.com/) (PayPal
Payment)
Armani Jeans Wholesale(http://www.24hoursneakers.com/) (PayPal
Payment)
Crown Holder Jeans Wholesale(http://www.24hoursneakers.com/)
(PayPal Payment)
Red Monkey Jeans Wholesale(http://www.24hoursneakers.com/)
(PayPal Payment)
TRUE RELIGION Jeans Wholesale(http://www.24hoursneakers.com/)
(PayPal Payment)
Rock&Republic Jeans Wholesale(http://www.24hoursneakers.com/)
(PayPal Payment)
Bape Jeans Wholesale(http://www.24hoursneakers.com/) (PayPal
Payment)
Christ audiger Jeans Wholesale(http://www.24hoursneakers.com/)
(PayPal Payment)
Evisu Jeans Wholesale(http://www.24hoursneakers.com/) (PayPal
Payment)
GUCCI Jeans Wholesale(http://www.24hoursneakers.com/) (PayPal
Payment)
Levis Jeans Wholesale(http://www.24hoursneakers.com/) (PayPal
Payment)
LV Jeans Wholesale(http://www.24hoursneakers.com/) (PayPal
Payment)
laguna beach Jeans Wholesale(http://www.24hoursneakers.com/)
(PayPal Payment)
Rock&Republic Jeans Wholesale(http://www.24hoursneakers.com/)
(PayPal Payment)

==============================================================================
TOPIC: Panasonic SA-HT900 ...
http://groups.google.com/group/sci.electronics.repair/t/14a7a8731143d537?hl=en
==============================================================================

== 1 of 7 ==
Date: Wed, Nov 3 2010 10:19 am
From: "Arfa Daily"

Has anybody got a proper paper service manual for this home cinema unit, or
access to a better Panasonic on-line copy for it, or a similar model for
their part of the world, than I have got here in the UK ? The tray timing is
completely screwed on the one I have on the bench. It looks like someone has
been 'at it' before me. The copy of the manual on the UK Panasonic service
website, is about two points to the left of useless in terms of the
reassembly / timing procedures. It is not a zoomable pdf file, but one of
those dreadful html things, where the photos and diagrams are all gifs with
a resolution of about 20 x 10 ! They appear on the screen the size of a
postage stamp - literally ... They are totally unreadable, and no use at
all. It's not as if this is a cheapo unit. How on earth do they expect
people to be able to fix the stuff, when this is the sort of level of
support that they're providing to their service network ?

Anyways, ranting aside, I just need to get a look at the tray re-assembly
diagrams and any notes, especially in regard of relative positionings, and
starting points for the cam gear, and the tray drive gear that runs off it.

TIA

Arfa

== 2 of 7 ==
Date: Wed, Nov 3 2010 10:28 am
From: D Yuniskis

Arfa Daily wrote:
> Anyways, ranting aside, I just need to get a look at the tray
> re-assembly diagrams and any notes, especially in regard of relative
> positionings, and starting points for the cam gear, and the tray drive
> gear that runs off it.

Any obvious "timing holes" in the gear(s) that can give a clue?

== 3 of 7 ==
Date: Wed, Nov 3 2010 10:39 am
From: Meat Plow

On Wed, 03 Nov 2010 17:19:14 +0000, Arfa Daily wrote:

> Has anybody got a proper paper service manual for this home cinema unit,
> or access to a better Panasonic on-line copy for it, or a similar model
> for their part of the world, than I have got here in the UK ? The tray
> timing is completely screwed on the one I have on the bench. It looks
> like someone has been 'at it' before me. The copy of the manual on the
> UK Panasonic service website, is about two points to the left of useless
> in terms of the reassembly / timing procedures. It is not a zoomable pdf
> file, but one of those dreadful html things, where the photos and
> diagrams are all gifs with a resolution of about 20 x 10 ! They appear
> on the screen the size of a postage stamp - literally ... They are
> totally unreadable, and no use at all. It's not as if this is a cheapo
> unit. How on earth do they expect people to be able to fix the stuff,
> when this is the sort of level of support that they're providing to
> their service network ?
>
> Anyways, ranting aside, I just need to get a look at the tray
> re-assembly diagrams and any notes, especially in regard of relative
> positionings, and starting points for the cam gear, and the tray drive
> gear that runs off it.
>
> TIA
>
> Arfa

Don't have any info. But having worked on a similar 5 disc rotary changer
unit I wanted to wish you good luck if you couldn't find suitable
technical literature.

--
Live Fast, Die Young and Leave a Pretty Corpse

== 4 of 7 ==
Date: Wed, Nov 3 2010 2:17 pm
From: "Trevor Wilson"

Arfa Daily wrote:
> Has anybody got a proper paper service manual for this home cinema
> unit, or access to a better Panasonic on-line copy for it, or a
> similar model for their part of the world, than I have got here in
> the UK ? The tray timing is completely screwed on the one I have on
> the bench. It looks like someone has been 'at it' before me. The copy
> of the manual on the UK Panasonic service website, is about two
> points to the left of useless in terms of the reassembly / timing
> procedures. It is not a zoomable pdf file, but one of those dreadful
> html things, where the photos and diagrams are all gifs with a
> resolution of about 20 x 10 ! They appear on the screen the size of a
> postage stamp - literally ... They are totally unreadable, and no use
> at all. It's not as if this is a cheapo unit. How on earth do they
> expect people to be able to fix the stuff, when this is the sort of
> level of support that they're providing to their service network ?
> Anyways, ranting aside, I just need to get a look at the tray
> re-assembly diagrams and any notes, especially in regard of relative
> positionings, and starting points for the cam gear, and the tray
> drive gear that runs off it.

**Send me an email. I may be able to assist.

--
Trevor Wilson
www.rageaudio.com.au

== 5 of 7 ==
Date: Wed, Nov 3 2010 7:01 pm
From: "Arfa Daily"

"Trevor Wilson" <trevor@rageaudio.com.au> wrote in message
news:8je1s2Fbg3U1@mid.individual.net...
> Arfa Daily wrote:
>> Has anybody got a proper paper service manual for this home cinema
>> unit, or access to a better Panasonic on-line copy for it, or a
>> similar model for their part of the world, than I have got here in
>> the UK ? The tray timing is completely screwed on the one I have on
>> the bench. It looks like someone has been 'at it' before me. The copy
>> of the manual on the UK Panasonic service website, is about two
>> points to the left of useless in terms of the reassembly / timing
>> procedures. It is not a zoomable pdf file, but one of those dreadful
>> html things, where the photos and diagrams are all gifs with a
>> resolution of about 20 x 10 ! They appear on the screen the size of a
>> postage stamp - literally ... They are totally unreadable, and no use
>> at all. It's not as if this is a cheapo unit. How on earth do they
>> expect people to be able to fix the stuff, when this is the sort of
>> level of support that they're providing to their service network ?
>> Anyways, ranting aside, I just need to get a look at the tray
>> re-assembly diagrams and any notes, especially in regard of relative
>> positionings, and starting points for the cam gear, and the tray
>> drive gear that runs off it.
>
> **Send me an email. I may be able to assist.
>
>
> --
> Trevor Wilson
> www.rageaudio.com.au
>

Thanks Trev. See direct reply to the mail you sent me.

Arfa

== 6 of 7 ==
Date: Wed, Nov 3 2010 7:07 pm
From: "Arfa Daily"

"D Yuniskis" <not.going.to.be@seen.com> wrote in message
news:ias5nb$2dp$1@speranza.aioe.org...
> Arfa Daily wrote:
>> Anyways, ranting aside, I just need to get a look at the tray re-assembly
>> diagrams and any notes, especially in regard of relative positionings,
>> and starting points for the cam gear, and the tray drive gear that runs
>> off it.
>
> Any obvious "timing holes" in the gear(s) that can give a clue?

You would have thought so, wouldn't you ? The simple answer is "yes", there
are two holes in the main cam gear. Follow this though, with "no" - they
don't seem to give any clue as to where they should be set, and when ...
:-(

Actually, I now know what should be where, as Trevor in Oz has sent me a
Panasonic publication (that I didn't see or - maybe spot - on the Pan UK
website) that has a lot of general info on SA-HT series units, and down in
the depths of it, is a single sheet line drawing of what should be where and
when, together with some simple and straightforward notes. So tomorrow
morning, I will give it a go. Here's hoping ... !!

Arfa

== 7 of 7 ==
Date: Wed, Nov 3 2010 7:09 pm
From: "Arfa Daily"

"Meat Plow" <mhywatt@yahoo.com> wrote in message
news:pan.2010.11.03.17.37.50@lmao.lol.lol...
> On Wed, 03 Nov 2010 17:19:14 +0000, Arfa Daily wrote:
>
>> Has anybody got a proper paper service manual for this home cinema unit,
>> or access to a better Panasonic on-line copy for it, or a similar model
>> for their part of the world, than I have got here in the UK ? The tray
>> timing is completely screwed on the one I have on the bench. It looks
>> like someone has been 'at it' before me. The copy of the manual on the
>> UK Panasonic service website, is about two points to the left of useless
>> in terms of the reassembly / timing procedures. It is not a zoomable pdf
>> file, but one of those dreadful html things, where the photos and
>> diagrams are all gifs with a resolution of about 20 x 10 ! They appear
>> on the screen the size of a postage stamp - literally ... They are
>> totally unreadable, and no use at all. It's not as if this is a cheapo
>> unit. How on earth do they expect people to be able to fix the stuff,
>> when this is the sort of level of support that they're providing to
>> their service network ?
>>
>> Anyways, ranting aside, I just need to get a look at the tray
>> re-assembly diagrams and any notes, especially in regard of relative
>> positionings, and starting points for the cam gear, and the tray drive
>> gear that runs off it.
>>
>> TIA
>>
>> Arfa
>
> Don't have any info. But having worked on a similar 5 disc rotary changer
> unit I wanted to wish you good luck if you couldn't find suitable
> technical literature.
>
>

Think I've got what I need now, Meat - see my other reply in the thread.
Thanks for your luck wishes !

Arfa

==============================================================================
TOPIC: paypal payment wholesale SHOES(ugg boots timberland boots,munich shoes,
nike,adidas,lv.gucci,chanel,prada,polo,d&g,dior,and so on )http://www.
jialiuonline.com/
http://groups.google.com/group/sci.electronics.repair/t/3c26a708a7b03590?hl=en
==============================================================================

== 1 of 1 ==
Date: Wed, Nov 3 2010 6:00 pm
From: amy

Cheap Wholesale Gucci Shoes <free shipping paypal payment>
(http://www.jialiuonline.com/ )
Cheap Wholesale GUCCI Boots
Cheap Wholesale Lacoste Shoes
Cheap Wholesale LV Shoes <free shipping paypal payment>
(http://www.jialiuonline.com/ )
Cheap Wholesale LV Boots
Cheap Wholesale Prada Shoes <free shipping paypal payment>
(http://www.jialiuonline.com/ )
Cheap Wholesale Timberland Shoes
Cheap Wholesale D&G Shoes <free shipping paypal payment>
(http://www.jialiuonline.com/ )
Cheap Wholesale D&G Boots
Cheap Wholesale Puma Shoes
Cheap Wholesale Puma AAA <free shipping paypal payment>
(http://www.jialiuonline.com/ )
Cheap Wholesale UGG Boots Shoes
Cheap Wholesale Bikkem Bergs Shoes (free shipping)
Cheap Wholesale Mauri Shoes Man
Cheap Wholesale Versace Shoes <free shipping paypal payment>
(http://www.jialiuonline.com/ )
Cheap Wholesale Versace Boots
Cheap Wholesale Paul Smith Shoes (free shipping)
Cheap Wholesale BOSS Shoes
Cheap Wholesale Burberry Shoes <free shipping paypal payment>
(http://www.jialiuonline.com/ )
Cheap Wholesale Dsquared shoes
Cheap Wholesale Dior Shoes (free shipping)
Cheap Wholesale Dior Boots
Cheap Wholesale ED Hardy Shoes <free shipping paypal payment>
(http://www.jialiuonline.com/ )
Cheap Wholesale ED Hardy Boots
Cheap Wholesale ED Hardy Shoes Man <free shipping paypal payment>
(http://www.jialiuonline.com/ )
Cheap Wholesale Fendi Shoes <free shipping paypal payment>
(http://www.jialiuonline.com/ )
Cheap Wholesale Fendi Boots
Cheap Wholesale AFF Shoes <free shipping paypal payment>
(http://www.jialiuonline.com/ )
Cheap Wholesale Evisu Shoes (free shipping)
Cheap Wholesale 4US Shoes
Cheap Wholesale Sebago Shoes <free shipping paypal payment>
(http://www.jialiuonline.com/ )
Cheap Wholesale Supra Shoes
Cheap Wholesale Hight Converse Shoes <free shipping paypal payment>
(http://www.jialiuonline.com/ )
Cheap Wholesale Coach Boots
Cheap Wholesale Coach Shoes
Women Christian Louboutin <free shipping paypal payment>
(http://www.jialiuonline.com/ )
Cheap Wholesale Chanel Shoes
Cheap Wholesale Chanel Boots (free shipping)
Cheap Wholesale Bape Shoes
Cheap Wholesale Adidas Shoes <free shipping paypal payment>
(http://www.jialiuonline.com/ )
Cheap Wholesale Adicolor (free shipping)
Cheap Wholesale Adidas 35TH <free shipping paypal payment>
(http://www.jialiuonline.com/ )
Cheap Wholesale Adidas NBA
Cheap Wholesale Adidas Running <free shipping paypal payment>
(http://www.jialiuonline.com/ )
Cheap Wholesale Adidas Y3
Cheap Wholesale Soccer Shoes <free shipping paypal payment>
(http://www.jialiuonline.com/ )

==============================================================================
TOPIC: OT: Video - Twin Turbo Gallardo Crash @ 200 MPH
http://groups.google.com/group/sci.electronics.repair/t/d9363cb619a90a7b?hl=en
==============================================================================

== 1 of 1 ==
Date: Wed, Nov 3 2010 6:54 pm
From: RoadRunner

Twin Turbo Lamborghini Gallardo crashes at 200+ MPH at the 2010 Texas
Mile.

http://www.craigboyce.com/w/2010/11/turbo_gallardo_crash/

==============================================================================

You received this message because you are subscribed to the Google Groups "sci.electronics.repair"
group.

To post to this group, visit http://groups.google.com/group/sci.electronics.repair?hl=en

To unsubscribe from this group, send email to sci.electronics.repair+unsubscribe@googlegroups.com

To change the way you get mail from this group, visit:
http://groups.google.com/group/sci.electronics.repair/subscribe?hl=en

To report abuse, send email explaining the problem to abuse@googlegroups.com

==============================================================================
Google Groups: http://groups.google.com/?hl=en

Electronics

sci.electronics.repair - 19 new messages in 10 topics - digest

No Response to "sci.electronics.repair - 19 new messages in 10 topics - digest"

Post a Comment

Blog Roll

Blog Archive