Digest for sci.electronics.repair@googlegroups.com - 3 updates in 2 topics

Rheilly Phoull <rheilly@bigslong.com>: Jul 24 12:44PM +0800

On 23/07/2016 10:18 PM, Mr Sandman wrote:
> that is faulty as i could see in the manual.
 
> cheers
 
> steve
 
 
So as Phil says, you should be checking for DC at the caps and if that
is only 43vdc then the fault is in the charging board. Are you intending
to repair the board or replace it?
Phil Allison <pallison49@gmail.com>: Jul 24 02:20AM -0700

Mr Sandman wrote:
 
 
> Reverse the probes and the reading drops to zero.
 
> ---------
 
> I am using a digital multimeter, a fairly decent one.
 
** Make and model - please !
 
> Probing the caps
> directly i get the voltages i mentioned.
 
** What about when you reverse the leads?
 
FYI:
 
There has got to be at least one DMM maker who uses a half wave rectifier directly coupled to the DC meter circuit - mimicking how an moving coil multi-meter does the same job.
 

 
... Phil
N_Cook <diverse@tcp.co.uk>: Jul 24 08:37AM +0100

So SMD 400V MLCC caps do exist (or did exist)
http://www.mouser.co.uk/ProductDetail/AVX/22258C224KAT9A/?qs=sGAEpiMZZMvsSlwiRhF8qtMAW1uaXrptEm0l1HszexY%3d
 
 
non-stocked, none on order, I wonder why
You received this digest because you're subscribed to updates for this group. You can change your settings on the group membership page.
To unsubscribe from this group and stop receiving emails from it send an email to sci.electronics.repair+unsubscribe@googlegroups.com.

No Response to "Digest for sci.electronics.repair@googlegroups.com - 3 updates in 2 topics"

Post a Comment