- lost one channel on an old Onkyo amplifier - 3 Updates
- Help understanding fan motor. - 1 Update
| thekmanrocks@gmail.com: Apr 06 09:41AM -0700 John-Del wrote: >That was 5 years ago. Also, he said it was just the >balance control mistakenly rolled over to one side. ________ If so, then the only issue with this amplifier was lack of basic trouble-shooting. |
| Tim R <timothy42b@aol.com>: Apr 07 07:52AM -0700 > >balance control mistakenly rolled over to one side. > ________ > If so, then the only issue with this amplifier was lack of basic trouble-shooting. I'm still here, the Onkyo still works, at least as of last night. Annoyingly, now moving the volume control causes some fuzz and one speaker drops out, but usually comes back with a few rapid twists. But the sound quality is good. |
| "pfjw@aol.com" <peterwieck33@gmail.com>: Apr 07 09:10AM -0700 On Tuesday, April 7, 2020 at 10:52:42 AM UTC-4, Tim R wrote: > Annoyingly, now moving the volume control causes some fuzz and one speaker drops out, but usually comes back with a few rapid twists. But the sound quality is good. Lack of basic troubleshooting, and, apparently, basic maintenance. Clean the controls, starting with the VC, then all other pots and switches. Should be good for another 5 years after that! Peter Wieck Melrose Park, PA |
| Allodoxaphobia <trepidation@example.net>: Apr 06 05:10PM > On Monday, April 29, 2013 at 6:30:11 AM UTC-5, Splork wrote: > Comments greatly desired What you want are suggestions and helpful tips. Self-referentially, this ng has FAR TOO many "comments". |
| You received this digest because you're subscribed to updates for this group. You can change your settings on the group membership page. To unsubscribe from this group and stop receiving emails from it send an email to sci.electronics.repair+unsubscribe@googlegroups.com. |
No Response to "Digest for sci.electronics.repair@googlegroups.com - 4 updates in 2 topics"
Post a Comment