| bruce bowser <bruce2bowser@gmail.com>: Dec 17 11:42AM -0800 On Sunday, September 27, 2020 at 8:27:14 PM UTC-4, crazy chicken wrote: > Thank you so much! I will tell you if any of this works! If it does, anyone else that comes into the google group will see your message and leave! "an analog-to-digital converter box transfers the VHS signal from a VCR. The converter box creates an MPEG file of the VHS tape (to a hard/flash drive). -- https://itstillworks.com/how-to-copy-vhs-to-flash-drives-10186.html |
| bruce bowser <bruce2bowser@gmail.com>: Dec 17 11:46AM -0800 On Thursday, December 17, 2020 at 2:42:48 PM UTC-5, bruce bowser wrote: > > Thank you so much! I will tell you if any of this works! If it does, anyone else that comes into the google group will see your message and leave! > "an analog-to-digital converter box transfers the VHS signal from a VCR. The converter box creates an MPEG file of the VHS tape (to a hard/flash drive). > -- https://itstillworks.com/how-to-copy-vhs-to-flash-drives-10186.html I didn't know that you could copy the VCR or VHS tape onto the DVD (then transfer to a hard/flash drive). |
| bruce bowser <bruce2bowser@gmail.com>: Dec 17 11:15AM -0800 On Tuesday, December 1, 2020 at 1:32:58 PM UTC-5, Chuck wrote: > like the hot glue idea, which I have in abundance here, and I can always > reheat later to the wires come right back off the board. I just have to > be sure not to get any of the glue on the soldered traces themselves. I'm sure that the container makes and oil in pole pigs won't have such a leak problem as your home spun contraption. Not to say that hauling a decommissioned transformer, capacitor or inductor from off of a telephone pole into your garage for emptying is a good idea, either. |
| You received this digest because you're subscribed to updates for this group. You can change your settings on the group membership page. To unsubscribe from this group and stop receiving emails from it send an email to sci.electronics.repair+unsubscribe@googlegroups.com. |
No Response to "Digest for sci.electronics.repair@googlegroups.com - 3 updates in 2 topics"
Post a Comment