- No longer in my ears - 3 Updates
- TV won't start, one problem or two? - 1 Update
- Darius D1450 and AT&T CM-1200 "tweeting" - 2 Updates
| micky <NONONOmisc07@fmguy.com>: Feb 05 11:38PM -0500 I have a pair of Bose Hearphones, cheaper than hearing aids. I only use it at meetings (which I don't go to because of Corona) and to watch Law & Order on TV (because all the other shows are loud enough but it's not.) The device consists of a yoke with the on/off button, two leds, a charging jack, and the battery, and two earbuds. Each earbud has 3 microphones, they say**, and when being put in my ears they sometimes squeal, which the manual says is normal. Feedback, I guess. The question is, when both buds are no longer in my ears, the device waits a while and turns off. How does it know that the earbuds are no longer in my ears? **And it can be set to amplify what's in front, what's in front and to the sides, and sounds from all diretions, so it probably does have 3 mikes per ear. As good as this might sound, there are one or two other competitors. Before I bought this I googled but didn't find them. One will play the last 10 seconds back again, and iirc will play the last 10 seconds at reduced speed. I'd feel real bad that I didn't get that one, except I probably wouldn't use those things, at least at a lecture. If I were in the market, I'd look at the others before buying any of them. |
| "Rod Speed" <rod.speed.aaa@gmail.com>: Feb 06 04:52PM +1100 "micky" <NONONOmisc07@fmguy.com> wrote in message news:227s1g12me5onj0o1i6a79stskif7f50qt@4ax.com... > The question is, when both buds are no longer in my ears, the device > waits a while and turns off. > How does it know that the earbuds are no longer in my ears? I was going to say because it can no longer shine a light from ear bud to the other... One obvious approach would be temperature or capacitance. |
| Peeler <trolltrap@valid.invalid>: Feb 06 10:18AM +0100 On Sat, 6 Feb 2021 16:52:10 +1100, cantankerous trolling geezer Rodent Speed, the auto-contradicting senile sociopath, blabbered, again: > shine a light from ear bud to the other... > One obvious approach would > be temperature or capacitance. IOW, you haven't the foggiest, but you will mouth off in your known "all-knowing" manner anyway, you subnormal senile know-it-all! -- "Who or What is Rod Speed? Rod Speed is an entirely modern phenomenon. Essentially, Rod Speed is an insecure and worthless individual who has discovered he can enhance his own self-esteem in his own eyes by playing "the big, hard man" on the InterNet." https://www.pcreview.co.uk/threads/rod-speed-faq.2973853/ |
| micky <NONONOmisc07@fmguy.com>: Feb 05 11:37PM -0500 In sci.electronics.repair, on Mon, 1 Feb 2021 09:40:57 -0800 (PST), Tim >We turn on our Emerson Model LF391EM4F flat screen, (manufactured 2013). The screen shows the Emerson logo, then there's a staticky pop noise and it shuts off. >I tried unplugging it for a bit and plugging it back in. No luck. We've had it for a while, and TVs are dirt cheap now. But here's what seems weird. >I'm teleworking so I have to be on line for work. When I unplugged it, our WiFi stopped. It came back up maybe 5 minutes or so later. Very annoying if you're on a video call. I was pretty sure I hadn't unplugged the cable box or router. This won't help you at all, but I have two table radios, one on top of another, and when I turn one on, a certain station I listen to on the other goes totally silent!! |
| Jef Od <jodell66@gmail.com>: Feb 05 02:47PM -0800 Hello all. I tried to locate a chat room for this specifically but...this is the only thing that I've found. I'm not electronically knowledgeable enough to know what to do so, here's my question; I have a blown HER303 and I'm wondering if I should replace it with a "larger" diode? I ask this since it looks like it stays pretty hot whenever energized. Oh yea, this is a compact hard drive power supply. Any help would be VERY appreciated. ~Jef |
| Jef Od <jodell66@gmail.com>: Feb 05 03:04PM -0800 On Friday, February 5, 2021 at 5:47:42 PM UTC-5, Jef Od wrote: UPDATE: I really don't understand this depth of verbiage but, I found this post and would very much appreciate some "seasoned guidance". This Mouser diode has both lower reverse recovery time and is rated for 4 Amps at 80C. http://www.mouser.com/search/ProductDetail.aspx?qs=cfR2GKjf2RmZMQwrlOf4Ew%3D%3D ~Jef |
| You received this digest because you're subscribed to updates for this group. You can change your settings on the group membership page. To unsubscribe from this group and stop receiving emails from it send an email to sci.electronics.repair+unsubscribe@googlegroups.com. |
No Response to "Digest for sci.electronics.repair@googlegroups.com - 6 updates in 3 topics"
Post a Comment