Digest for sci.electronics.repair@googlegroups.com - 2 updates in 2 topics

Retro Deck <asuspropad@gmail.com>: Jan 08 11:03PM -0800

Charles Lucas ezt írta (2022. július 17., vasárnap, 1:15:21 UTC+2):
> integrated circuits and circuits out there and different ways to actuate them (a resistor,a diode, a transistor, or cap, etc...), so it depends on
> the design of the circuit. If I have a model number, I can tell you what pins to check to verify correct operation. I have been a tech. for 32
> years and not all circuits are designed the same. The initial information is generalized as a guide. If you want something more specific, please provide a model number or an FCC ID number. God Bless you.
 
Hello! I have read all your posts and you are absolutely right. Unfortunately, there are always such people who qualify the helpers. Well, I also learned a lot from what was written here, at the hobby level I repair a VHS VCR, which also has no color. The type is AKAI VS-3. I repaired the servo part and the power part did not work. Now it starts, plays, spins. The head drum was also bad, so I put in a new original one. Now there is a picture, but it is black and white and jumps a little. I can't adjust the tape path any better. I would really appreciate it if you could advise me. I checked the video pcb, all12, pb12 are fine. Unfortunately, I don't have a test cassette, although I tried to make a color bar cassette and check it at the test points, but I didn't have much success.
Thank you in advance for your help.
"Peter W." <peterwieck33@gmail.com>: Jan 08 09:42AM -0800

https://newsgroupservers.net/usenet-basics/usenet-newsgroup-reader/
 
https://en.wikipedia.org/wiki/List_of_Usenet_newsreaders
 
https://www.itpro.com/infrastructure/network-internet/368088/six-of-the-best-usenet-newsgroup-readers
 
Not rocket science.
 
Peter Wieck
Melrose Park, PA
You received this digest because you're subscribed to updates for this group. You can change your settings on the group membership page.
To unsubscribe from this group and stop receiving emails from it send an email to sci.electronics.repair+unsubscribe@googlegroups.com.

No Response to "Digest for sci.electronics.repair@googlegroups.com - 2 updates in 2 topics"

Post a Comment