sci.electronics.repair@googlegroups.com

Today's topics:

* "waaah boo hoo" - Phallison - 1 messages, 1 author
http://groups.google.com/group/sci.electronics.repair/t/bc73aae36aa34f0a?hl=en
* In 1998, the Air Force first reported the biggest increase in NC so-called
¡°Super Blue¡± and immediately think that they can spend a lot of people are
very successful companies, but he also had to make such a property. Who is the
actor said: ¡°It - 1 messages, 1 author
http://groups.google.com/group/sci.electronics.repair/t/748e43aff3861719?hl=en
* Switching Diode ID required - 8 messages, 3 authors
http://groups.google.com/group/sci.electronics.repair/t/bb0cfa8583047f84?hl=en
* motherboard RAM failures - 9 messages, 6 authors
http://groups.google.com/group/sci.electronics.repair/t/3e25b3ae78058770?hl=en
* Marshall JCM 2000, 1998 - 2 messages, 2 authors
http://groups.google.com/group/sci.electronics.repair/t/3338dc78a01d3b6d?hl=en
* How to repair plastic seal for liquids used in human consumption? - 2
messages, 2 authors
http://groups.google.com/group/sci.electronics.repair/t/13de143057f9156c?hl=en
* Niglet muh diks 14 year old girl - 1 messages, 1 author
http://groups.google.com/group/sci.electronics.repair/t/181e8502b581d25b?hl=en

==============================================================================
TOPIC: "waaah boo hoo" - Phallison
http://groups.google.com/group/sci.electronics.repair/t/bc73aae36aa34f0a?hl=en
==============================================================================

== 1 of 1 ==
Date: Wed, Mar 16 2011 9:28 pm
From: boardjunkie1

On Mar 16, 9:09 pm, "Phil Allison" <phi...@tpg.com.au> wrote:
> "bored junkies are all losers "
>
> Check plate current directly. Its not a great idea to ballpark bias by
> mains current...
>
> ** Wrong  advice  -  as always.
>
> ....  Phil

Still not there yet......keep trying....

==============================================================================
TOPIC: In 1998, the Air Force first reported the biggest increase in NC so-
called ¡°Super Blue¡± and immediately think that they can spend a lot of
people are very successful companies, but he also had to make such a property.
Who is the actor said: ¡°It
http://groups.google.com/group/sci.electronics.repair/t/748e43aff3861719?hl=en
==============================================================================

== 1 of 1 ==
Date: Thurs, Mar 17 2011 2:18 am
From: cntrade09

In 1998, the Air Force first reported the biggest increase in NC so-
called ¡°Super Blue¡± and immediately think that they can spend a lot
of people are very successful companies, but he also had to make such
a property. Who is the actor said: ¡°It is always good to better¡±,
Nike Air Max 90 otherwise, people can not just look at these shoes
well, but in the end what do you think there is hope.

130 These languages are incredible shoes in purple neon and the base
color of the shoes. Mar
These languages are incredible shoes in purple neon and the base color
of the shoes. Mark flying giant Nike has a shoe to ensure comfort. If
anyone wants to see pictures of these shoes can be found at various
websites. Nike Air Max 90

Iconic Nike Air Max 95 has been re-produced in numerous colors for 15
years. Air Max 95 Of course, black and gray gradient features, such as
recent photos, the blue panel is usually the most popular color, but
Nike in the near future to launch a new color cosmetics.

Jordan shoes, mitigation, and add the appropriate design, to provide
air support market Nike Air Max 2011 . Now, the next one account can
not tell you where shoes celebrity therapy.Jordan 2010, the brilliant,
a good progress in its rich emotional Band-Aid agencies are important.
As a typical example, the participation of women in Jordan, high
heels, you really need to know, because cheap Nike Jordan, under
normal circumstances, practice.

131 Although most of the as Harajuku Nike Air Max creations have owned
a safari theme (print
Although most of the as Harajuku Nike Air Max creations have owned a
safari theme (print elephant, crocodile), tenth section chooses a
singular, unique design of its kind. This Air Force 1, inspired by a
pair of jeans, is entirely composed of blue denim, and features a tan
contrast stitching to mimic the seams of a pair of jeans. Coinciding
with the last element, so also is used in the heel tab and the liner.
One of the most interesting features of this shoe is the
representation of jeans size measurements in the heel (W30 L34). Other
features include a midsole transparent red outlining the brand image
of Red Swoosh and heel. See
www.airmax-seller.com

==============================================================================
TOPIC: Switching Diode ID required
http://groups.google.com/group/sci.electronics.repair/t/bb0cfa8583047f84?hl=en
==============================================================================

== 1 of 8 ==
Date: Thurs, Mar 17 2011 3:11 am
From: "Gareth Magennis"

"Phil Allison" <phil_a@tpg.com.au> wrote in message
news:8ud0glFu9vU1@mid.individual.net...
>
> "Gareth Magennis"
>>
>> trying to find equivalents for a Dual Diode T220F package (insulated
>> tab). Device is marked RF2001, but can't seem to find a datasheet.
>
>
> ** You did not look very hard - using " rf2001 diode " the pdf below is
> the third hit.
>
> It is NOT in fact a dual diode - dumbass.
>
> http://www.rohm.com/products/databook/di/pdf/rf2001t4s.pdf
>
>
>
> .... Phil
>

Thanks Phil, don't know why I wasn't able to find that, I tried twice you
know, honest.

Actually these ARE dual diodes. On further Googling for the ROHM devices,
it turns out there are 3 different types: RF2001 T2D, T3D, and the T4S you
linked to here. The T2D and T3D are both dual devices, one the opposite
polarity of the other, and the T4S as we can see is a single diode.

(My devices are actually marked on the second line T2D, I thought this was
just a date code or something).

Cheers,

Gareth.

== 2 of 8 ==
Date: Thurs, Mar 17 2011 3:26 am
From: "Gareth Magennis"

"Phil Allison" <phil_a@tpg.com.au> wrote in message
news:8ud0glFu9vU1@mid.individual.net...
>
> "Gareth Magennis"
>>
>> trying to find equivalents for a Dual Diode T220F package (insulated
>> tab). Device is marked RF2001, but can't seem to find a datasheet.
>
>
> ** You did not look very hard - using " rf2001 diode " the pdf below is
> the third hit.
>
> It is NOT in fact a dual diode - dumbass.
>
> http://www.rohm.com/products/databook/di/pdf/rf2001t4s.pdf
>
>
>
> .... Phil
>

Oh, and I know you like to know these things, so this is the damn amp in
question:

http://www.markbass.it/product_detail.php?id=69

Gareth.

== 3 of 8 ==
Date: Thurs, Mar 17 2011 3:34 am
From: "Phil Allison"

"Gareth Magennis"
>
> Oh, and I know you like to know these things, so this is the damn amp in
> question:
>
> http://www.markbass.it/product_detail.php?id=69

** Seen a few of these POS with regular iron PSUs.

Look like something built is a Bronx garage by frightened wet backs.

Awful.

.... Phil

== 4 of 8 ==
Date: Thurs, Mar 17 2011 5:48 am
From: "William Sommerwerck"

>>> It is NOT in fact a dual diode -- dumbass.

>> You are confusing the poster with a famous French writer.

> ** Somebody once made a bunch of money from a song
> that declared: > " Pablo Picasso was not an asshole "
> So, maybe there is a buck to be made from one that says:
> " Alexandre Dumas was not a dumbass "

> Wadaya think...??

You got the joke. That's all I care about.

== 5 of 8 ==
Date: Thurs, Mar 17 2011 6:20 am
From: "Phil Allison"

"William Sommerwanker"
>
>>>> It is NOT in fact a dual diode -- dumbass.
>
>>> You are confusing the poster with a famous French writer.
>
>> ** Somebody once made a bunch of money from a song
>> that declared:
>
> " Pablo Picasso is not an asshole "
>
>> So, maybe there is a buck to be made from one that says:
>
>> " Alexandre Dumas was not a dumbass "
>
>> Wadaya think...??
>
> You got the joke.

** Shame it totally lacked any kind of humour.

And you are still a revolting pile of autistic, sub human shit.

God, I hope you die in screaming agony.

... Phil

== 6 of 8 ==
Date: Thurs, Mar 17 2011 6:40 am
From: "William Sommerwerck"

>>> Wadaya think...??

>> You got the joke.

> Shame it totally lacked any kind of humour.

Isn't a lack of humour [sic] a form of humor in and of itself?

> And you are still a revolting pile of autistic, sub-human
> shit. God, I hope you die in screaming agony.

Please -- I can't handle flattery.

If you saw and heard my magnificent AV system (KURO, Apogee, Curl) you would
not be so quick to criticize. You would be begging to visit.

== 7 of 8 ==
Date: Thurs, Mar 17 2011 6:45 am
From: "Phil Allison"

"William Sommerwanker is aCunt "
>

** Shame it totally lacked any kind of humour.

And you are still a revolting pile of autistic, sub human shit.

God, I hope you die in screaming agony.

... Phil

== 8 of 8 ==
Date: Thurs, Mar 17 2011 7:40 am
From: "William Sommerwerck"

Wit is the first thing to go...

==============================================================================
TOPIC: motherboard RAM failures
http://groups.google.com/group/sci.electronics.repair/t/3e25b3ae78058770?hl=en
==============================================================================

== 1 of 9 ==
Date: Thurs, Mar 17 2011 5:00 am
From: PeterD

On 3/16/2011 11:03 PM, Smitty Two wrote:
> In article<pan.2011.03.16.21.21.29@lmao.lol.lol>,
> Meat Plow<mhywatt@yahoo.com> wrote:
>
>> On Wed, 16 Mar 2011 12:27:42 -0700, Smitty Two wrote:
>>
>>> Recently starting building computers for a customer, using components
>>> they supply, and have run into an alarming percentage (10?) of
>>> motherboards that fail to recognize one RAM slot. Swapping the MB puts
>>> them in order, and so far the customer has not had any problem returning
>>> the bad MBs for credit to his vendor.
>>>
>>> Is this a known epidemic? RoHS associated? I'm not being faulted for
>>> this issue, but also wondering how likely it is that my (experienced)
>>> employee is damaging the RAM slots when he plugs in the RAM.
>>>
>>> All reasoned feedback appreciated.
>>
>> MB manufacturer?
>
> MSI.

They are usually good. I assume you try other RAM to make sure that you
are not using a marginal RAM device, right?

If it is an RoHS issue, I'd be very worried that it will happen as the
board age and heat cycle stresses build up over time.

--
I'm never going to grow up.

== 2 of 9 ==
Date: Thurs, Mar 17 2011 9:28 am
From: "tm"

"PeterD" <peter2@hipson.net> wrote in message
news:ilst47$i76$4@pyrite.mv.net...
> On 3/16/2011 11:03 PM, Smitty Two wrote:
>> In article<pan.2011.03.16.21.21.29@lmao.lol.lol>,
>> Meat Plow<mhywatt@yahoo.com> wrote:
>>
>>> On Wed, 16 Mar 2011 12:27:42 -0700, Smitty Two wrote:
>>>
>>>> Recently starting building computers for a customer, using components
>>>> they supply, and have run into an alarming percentage (10?) of
>>>> motherboards that fail to recognize one RAM slot. Swapping the MB puts
>>>> them in order, and so far the customer has not had any problem
>>>> returning
>>>> the bad MBs for credit to his vendor.
>>>>
>>>> Is this a known epidemic? RoHS associated? I'm not being faulted for
>>>> this issue, but also wondering how likely it is that my (experienced)
>>>> employee is damaging the RAM slots when he plugs in the RAM.
>>>>
>>>> All reasoned feedback appreciated.
>>>
>>> MB manufacturer?
>>
>> MSI.
>
> They are usually good. I assume you try other RAM to make sure that you
> are not using a marginal RAM device, right?
>
> If it is an RoHS issue, I'd be very worried that it will happen as the
> board age and heat cycle stresses build up over time.
>
> --
> I'm never going to grow up.

Does he have an ESD problem?

tm

== 3 of 9 ==
Date: Thurs, Mar 17 2011 1:20 pm
From: Meat Plow

On Thu, 17 Mar 2011 12:28:07 -0400, tm wrote:

> "PeterD" <peter2@hipson.net> wrote in message
> news:ilst47$i76$4@pyrite.mv.net...
>> On 3/16/2011 11:03 PM, Smitty Two wrote:
>>> In article<pan.2011.03.16.21.21.29@lmao.lol.lol>,
>>> Meat Plow<mhywatt@yahoo.com> wrote:
>>>
>>>> On Wed, 16 Mar 2011 12:27:42 -0700, Smitty Two wrote:
>>>>
>>>>> Recently starting building computers for a customer, using
>>>>> components they supply, and have run into an alarming percentage
>>>>> (10?) of motherboards that fail to recognize one RAM slot. Swapping
>>>>> the MB puts them in order, and so far the customer has not had any
>>>>> problem returning
>>>>> the bad MBs for credit to his vendor.
>>>>>
>>>>> Is this a known epidemic? RoHS associated? I'm not being faulted for
>>>>> this issue, but also wondering how likely it is that my
>>>>> (experienced) employee is damaging the RAM slots when he plugs in
>>>>> the RAM.
>>>>>
>>>>> All reasoned feedback appreciated.
>>>>
>>>> MB manufacturer?
>>>
>>> MSI.
>>
>> They are usually good. I assume you try other RAM to make sure that you
>> are not using a marginal RAM device, right?
>>
>> If it is an RoHS issue, I'd be very worried that it will happen as the
>> board age and heat cycle stresses build up over time.
>>
>> --
>> I'm never going to grow up.
>
> Does he have an ESD problem?
>
>
>
> tm

I'd switch to Asus.

--
Live Fast Die Young, Leave A Pretty Corpse

== 4 of 9 ==
Date: Thurs, Mar 17 2011 3:48 pm
From: JR North

Likely your tech is spiking the ram or slot contacts by not being
properly grounded to earth and the puter case. I never venture inside,
and especially never swap ram without being grounded first.
JR

Smitty Two wrote:
> Recently starting building computers for a customer, using components
> they supply, and have run into an alarming percentage (10?) of
> motherboards that fail to recognize one RAM slot. Swapping the MB puts
> them in order, and so far the customer has not had any problem returning
> the bad MBs for credit to his vendor.
>
> Is this a known epidemic? RoHS associated? I'm not being faulted for
> this issue, but also wondering how likely it is that my (experienced)
> employee is damaging the RAM slots when he plugs in the RAM.
>
> All reasoned feedback appreciated.

--
--------------------------------------------------------------
Home Page: http://www.seanet.com/~jasonrnorth

== 5 of 9 ==
Date: Thurs, Mar 17 2011 7:20 pm
From: Smitty Two

In article <UO6dncsgwOUCEh_QnZ2dnUVZ_qmdnZ2d@posted.isomediainc>,
JR North <junkjasonrnorth@bigfoot.com> wrote:

> Likely your tech is spiking the ram or slot contacts by not being
> properly grounded to earth and the puter case. I never venture inside,
> and especially never swap ram without being grounded first.
> JR
>

Thanks for the suggestion, but ESD is not the issue.

>
> Smitty Two wrote:
> > Recently starting building computers for a customer, using components
> > they supply, and have run into an alarming percentage (10?) of
> > motherboards that fail to recognize one RAM slot. Swapping the MB puts
> > them in order, and so far the customer has not had any problem returning
> > the bad MBs for credit to his vendor.
> >
> > Is this a known epidemic? RoHS associated? I'm not being faulted for
> > this issue, but also wondering how likely it is that my (experienced)
> > employee is damaging the RAM slots when he plugs in the RAM.
> >
> > All reasoned feedback appreciated.

== 6 of 9 ==
Date: Thurs, Mar 17 2011 7:21 pm
From: Smitty Two

In article <pan.2011.03.17.20.19.42@lmao.lol.lol>,
Meat Plow <mhywatt@yahoo.com> wrote:

> I'd switch to Asus.

Not my call.

== 7 of 9 ==
Date: Thurs, Mar 17 2011 7:24 pm
From: Smitty Two

In article <ilst47$i76$4@pyrite.mv.net>, PeterD <peter2@hipson.net>
wrote:

> On 3/16/2011 11:03 PM, Smitty Two wrote:
> > In article<pan.2011.03.16.21.21.29@lmao.lol.lol>,
> > Meat Plow<mhywatt@yahoo.com> wrote:
> >
> >> On Wed, 16 Mar 2011 12:27:42 -0700, Smitty Two wrote:
> >>
> >>> Recently starting building computers for a customer, using components
> >>> they supply, and have run into an alarming percentage (10?) of
> >>> motherboards that fail to recognize one RAM slot. Swapping the MB puts
> >>> them in order, and so far the customer has not had any problem returning
> >>> the bad MBs for credit to his vendor.
> >>>
> >>> Is this a known epidemic? RoHS associated? I'm not being faulted for
> >>> this issue, but also wondering how likely it is that my (experienced)
> >>> employee is damaging the RAM slots when he plugs in the RAM.
> >>>
> >>> All reasoned feedback appreciated.
> >>
> >> MB manufacturer?
> >
> > MSI.
>
> They are usually good. I assume you try other RAM to make sure that you
> are not using a marginal RAM device, right?

Once the computers pass the single beep test and the visual inspection,
they are buttoned up and delivered. It's my customer who learns whether
there are issues with RAM or anything else beyond that. But I'm
reasonably sure that he's swapping the RAM stick before diagnosing the
"bad MB."

>
> If it is an RoHS issue, I'd be very worried that it will happen as the
> board age and heat cycle stresses build up over time.

== 8 of 9 ==
Date: Thurs, Mar 17 2011 8:00 pm
From: Jeff Liebermann

On Wed, 16 Mar 2011 12:27:42 -0700, Smitty Two
<prestwhich@earthlink.net> wrote:

>Recently starting building computers for a customer, using components
>they supply, and have run into an alarming percentage (10?) of
>motherboards that fail to recognize one RAM slot. Swapping the MB puts
>them in order, and so far the customer has not had any problem returning
>the bad MBs for credit to his vendor.

I haven't seen anything like that. However, I did have an unusual
problem when I purchased about 8 MSI motherboards from a distributor.
All the boards had a problem of some sort, but not all were identical,
which is usually the case with production defects. After some
investigation, I discovered that their shipping department had boxed
up and delivered the boards that were being returned by other
customers. This might be what's happening with the large number of
failures.

>Is this a known epidemic? RoHS associated? I'm not being faulted for
>this issue,

Not that I know about. However, it's considered standard practice to
assign the blame before the problem is identified and fixed.

>but also wondering how likely it is that my (experienced)
>employee is damaging the RAM slots when he plugs in the RAM.

Highly likely if he's using one set of RAM sticks to test the boards.
Unlikely if each board has its own set of RAM. Very unlikely if it's
the same slot that always craps out.

You might also check if the CPU is properly seated in its socket. That
has caused some similar (but not identical) problems.

>All reasoned feedback appreciated.

The model number of the MSI motherboard and the exact spec of the RAM
might have been helpful. Some motherboards are VERY picky about the
type and speed of RAM that they use. On the borderline devices, a
given SDRAM stick will barely work in one slot, and fail in others.
You might be dealing with such borderline situations. Numbers please.

--
Jeff Liebermann jeffl@cruzio.com
150 Felker St #D http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558

== 9 of 9 ==
Date: Thurs, Mar 17 2011 9:07 pm
From: Smitty Two

In article <mch5o6lvkka0nlgto4h7kcr1c0pk6029vb@4ax.com>,
Jeff Liebermann <jeffl@cruzio.com> wrote:

> On Wed, 16 Mar 2011 12:27:42 -0700, Smitty Two
> <prestwhich@earthlink.net> wrote:
>
> >Recently starting building computers for a customer, using components
> >they supply, and have run into an alarming percentage (10?) of
> >motherboards that fail to recognize one RAM slot. Swapping the MB puts
> >them in order, and so far the customer has not had any problem returning
> >the bad MBs for credit to his vendor.
>
> I haven't seen anything like that. However, I did have an unusual
> problem when I purchased about 8 MSI motherboards from a distributor.
> All the boards had a problem of some sort, but not all were identical,
> which is usually the case with production defects. After some
> investigation, I discovered that their shipping department had boxed
> up and delivered the boards that were being returned by other
> customers. This might be what's happening with the large number of
> failures.
>
> >Is this a known epidemic? RoHS associated? I'm not being faulted for
> >this issue,
>
> Not that I know about. However, it's considered standard practice to
> assign the blame before the problem is identified and fixed.
>
> >but also wondering how likely it is that my (experienced)
> >employee is damaging the RAM slots when he plugs in the RAM.
>
> Highly likely if he's using one set of RAM sticks to test the boards.
> Unlikely if each board has its own set of RAM. Very unlikely if it's
> the same slot that always craps out.
>
> You might also check if the CPU is properly seated in its socket. That
> has caused some similar (but not identical) problems.
>
> >All reasoned feedback appreciated.
>
> The model number of the MSI motherboard and the exact spec of the RAM
> might have been helpful. Some motherboards are VERY picky about the
> type and speed of RAM that they use. On the borderline devices, a
> given SDRAM stick will barely work in one slot, and fail in others.
> You might be dealing with such borderline situations. Numbers please.

Thanks for your detailed response. I am out of office until Monday and
will post back with further info then.

==============================================================================
TOPIC: Marshall JCM 2000, 1998
http://groups.google.com/group/sci.electronics.repair/t/3338dc78a01d3b6d?hl=en
==============================================================================

== 1 of 2 ==
Date: Thurs, Mar 17 2011 8:40 am
From: "Michael A. Terrell"

Arfa Daily wrote:
>
> "Michael A. Terrell" <mike.terrell@earthlink.net> wrote in message
> news:GuGdnWIqArZxQ-LQnZ2dnUVZ_oSdnZ2d@earthlink.com...
> >
> > Arfa Daily wrote:
> >>
> >> "Phil Allison" <phil_a@tpg.com.au> wrote in message
> >> news:8u95sgF4p3U1@mid.individual.net...
> >> >
> >> > "Gareth Magennis"
> >> >
> >> >
> >> > ** Bullshit stats YOU INVENTED are not engineering facts !!
> >> >
> >> > YOU GOD ALMIGHTY KNOW NOTHING POMMY CUNT
> >> > ---------------------------------------------------------------------------
> >> >
> >> >
> >> > Those same Port Jackson sharks would eat YOU for breakfast !!
> >> >
> >> >
> >>
> >> >
> >> ************* hey LooK pHILeeP -
> >>
> >> >>> ** I cAn do asTeRiskS and CAPItalS and eXClamaTION MARKS TOO !!!
> >> >>> <<<<
> >> >>> ***
> >>
> >> ** <> ***
> >>
> >> Never mind Gareth. Clearly he's either pissed or off his barmy head
> >> again,
> >> so with any luck, the dopey twat will stagger to the edge of the harbour
> >> and
> >> fall in himself, to be gobbled up by those naughty sharks ... :-)
> >
> >
> > Or he'll run into an angry bunch of sheep, in no mood for his sexual
> > advances...
> >
>
> Or perhaps he'll get his head stomped on by an irate kangaroo ...

Go Kanagroo, go!!!

--
You can't fix stupid. You can't even put a Band-Aid™ on it, because it's
Teflon coated.

== 2 of 2 ==
Date: Thurs, Mar 17 2011 8:50 am
From: "William Sommerwerck"

> Or perhaps he'll get his head stomped on by an irate kangaroo...

Disembowelment from a kick is more likely.

Herbivores are more dangerous than carnivores.

==============================================================================
TOPIC: How to repair plastic seal for liquids used in human consumption?
http://groups.google.com/group/sci.electronics.repair/t/13de143057f9156c?hl=en
==============================================================================

== 1 of 2 ==
Date: Thurs, Mar 17 2011 9:05 am
From: Robert Macy

On Mar 16, 12:11 pm, Rich Webb <bbew...@mapson.nozirev.ten> wrote:
> On Wed, 16 Mar 2011 09:42:19 -0700 (PDT), Robert Macy
>
>
>
>
>
> <m...@california.com> wrote:
> >Rich Webb, et al
>
> >Thank you for the emisupply URL!  I ordered from them, they shipped
> >promptly, huge calking type tube of RTV like glue
>
> >Easy to work with, smells like vinegar, sticky and cured quickly [per
> >instruction/description]
>
> >Best of all!  coffee pot does not leak and is now back in service!
>
> >HIGHLY RECOMMEND
> >EMI Supply
> >http://www.emisupply.com
>
> >Thanks again, I knew people here would know the answer
>
> Glad it worked out!
>
> Now that it's working, give <http://aerobie.com/products/aeropress.htm>
> a try, though. Just got one recently and it's *wonderful* for the
> occasional-cuppa-in-the-morning folks. Also quite fast to brew and an
> easy clean-up.
>
> --
> Rich Webb     Norfolk, VA- Hide quoted text -
>
> - Show quoted text -

Interesting. I have some gift coffee 'gourmet' packages that would be
ideal to use in such.

How much did it cost?

== 2 of 2 ==
Date: Thurs, Mar 17 2011 9:50 am
From: Rich Webb

On Thu, 17 Mar 2011 09:05:07 -0700 (PDT), Robert Macy
<macy@california.com> wrote:

>On Mar 16, 12:11�pm, Rich Webb <bbew...@mapson.nozirev.ten> wrote:
>> On Wed, 16 Mar 2011 09:42:19 -0700 (PDT), Robert Macy
>>
>>
>>
>>
>>
>> <m...@california.com> wrote:
>> >Rich Webb, et al
>>
>> >Thank you for the emisupply URL! �I ordered from them, they shipped
>> >promptly, huge calking type tube of RTV like glue
>>
>> >Easy to work with, smells like vinegar, sticky and cured quickly [per
>> >instruction/description]
>>
>> >Best of all! �coffee pot does not leak and is now back in service!
>>
>> >HIGHLY RECOMMEND
>> >EMI Supply
>> >http://www.emisupply.com
>>
>> >Thanks again, I knew people here would know the answer
>>
>> Glad it worked out!
>>
>> Now that it's working, give <http://aerobie.com/products/aeropress.htm>
>> a try, though. Just got one recently and it's *wonderful* for the
>> occasional-cuppa-in-the-morning folks. Also quite fast to brew and an
>> easy clean-up.
>>
>> --
>> Rich Webb � � Norfolk, VA- Hide quoted text -
>>
>> - Show quoted text -
>
>Interesting. I have some gift coffee 'gourmet' packages that would be
>ideal to use in such.
>
>How much did it cost?

It's not too bad. $25-$30. Carried by Amazon et al. I just use regular 8
O'Clock whole beans and pulverize 'm for about 30 secs or so in a
standard whirly-blade grinder.

--
Rich Webb Norfolk, VA

==============================================================================
TOPIC: Niglet muh diks 14 year old girl
http://groups.google.com/group/sci.electronics.repair/t/181e8502b581d25b?hl=en
==============================================================================

== 1 of 1 ==
Date: Thurs, Mar 17 2011 3:09 am
From: Lynn

http://www.pnj.com/article/20110317/NEWS01/103170310/1006/Tate-teen-court-Friday

A 16-year-old Tate High School student accused of sexually assaulting a
14-year-old girl in a classroom is scheduled to appear in juvenile court
at 1 p.m. Friday.

The boy was being held Wednesday in the juvenile detention center on
charges of second-degree sexual battery and indecent exposure.

The News Journal does not identify juveniles involved in crimes unless
they are charged as adults.

The girl has accused the boy of pushing her head toward his genital area
twice as they sat next to each other in a reading class at Tate High on
March 1, according to an Escambia County Sheriff's Office report.

A Sheriff's Office report contains new details about the incident,
including the suspect's statement that he did not force himself on the
girl. The suspect told officers he pulled back his shorts to expose
himself when the girl asked him to, and she then made advances on him.

The Sheriff's Office also interviewed three other students about the
incident.

Two of the students said the suspect exposed himself to them in the
classroom and asked them to look.

The suspect said he was joking with friends and was just acting like he
was going to expose himself, the report said.

All three said they witnessed the incident between the victim and
suspect. But the report does not indicate whether the students indicated
whether the boy was the aggressor.

The teacher saw nothing that went on.

The girl told the Sheriff's Office that was because of where the teacher
was sitting and other students blocking the teacher's view.

"(The girl) stated initially that she did not tell the faculty what
occurred because she feared retaliation from (the suspect) and his
friends," the report states.

The suspect as well as the 14-year-old girl were suspended.

==============================================================================

You received this message because you are subscribed to the Google Groups "sci.electronics.repair"
group.

To post to this group, visit http://groups.google.com/group/sci.electronics.repair?hl=en

To unsubscribe from this group, send email to sci.electronics.repair+unsubscribe@googlegroups.com

To change the way you get mail from this group, visit:
http://groups.google.com/group/sci.electronics.repair/subscribe?hl=en

To report abuse, send email explaining the problem to abuse@googlegroups.com

==============================================================================
Google Groups: http://groups.google.com/?hl=en