- Power switch is erratic on receiver - 1 Update
- Peavey Bandit, Solo Series, 1981 - 2 Updates
| Chuck <chuck@mydeja.net>: Mar 23 08:13AM -0500 On Wed, 22 Mar 2017 12:19:14 -0700 (PDT), "pfjw@aol.com" >So apart from the Revox, Sony and the HK2000, everything is from the US and from 'back in the day'. Much of it via dumpster-dives, and purchasing repair-shop leavings as my eyes and ears have always been larger than my wallet. I did drive 1,200 miles round-trip for the Maggies, however, after a friend auditioned them in-situ. The price was that good. They are truly worth it. >Peter Wieck >Melrose Park, PA The Citation 16 is a brute of an amp. A speaker company I worked for used them to test our speaker designs. One night a guy broke into our factory and grabbed one of our 16s. The cops were chasing his car up a steep hill and the amp fell out of the passenger door and rolled down the hill. The outside damage was horrendous. We plugged it in and it worked! --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus |
| N_Cook <diverse@tcp.co.uk>: Mar 23 12:06PM On 17/03/2017 16:30, N_Cook wrote: > FET, which will be the next thing to investigate, if no schematic found. > When last powered I did not think to see if the footswitch action gated > the opamp o/p. Any other ideas? How often have I seen this. Everything seems to work component-wise perfectly ok but something is not right. Its due to something I'm doing wrong, either a case of RTFM (no ref to this in the owner manual) or looking too logically at musician stuff. The front panel has a specific section labelled Lead Gain with a line extending out to the PRE pot and POST pot. The next section is marked Normal Gain pot. I was turning both "LEAD" pots to min for f/s engaging of normal and vice-versa for lead channel, but there must be some advancement of the POST pot for either channel to work, only seeing that in the schematic |
| N_Cook <diverse@tcp.co.uk>: Mar 23 12:08PM On 18/03/2017 05:57, Adam wrote: > Is this the one? > https://peavey.com/forum/download/file.php?id=14455 > -- Adam Yes, thanks for that. The only number with the model type , on the nameplate, is 82A, and the amp being rated 50W, no reference to 65 anywhere in the amp, c'est la guerre |
| You received this digest because you're subscribed to updates for this group. You can change your settings on the group membership page. To unsubscribe from this group and stop receiving emails from it send an email to sci.electronics.repair+unsubscribe@googlegroups.com. |
No Response to "Digest for sci.electronics.repair@googlegroups.com - 3 updates in 2 topics"
Post a Comment