| Larz <dispcal667@nospam.net>: Sep 07 09:19PM -0400 I picked up a surplus yard light called Electripak SV-175M thinking that it was 175 watts. It uses a mercury vapor bulb, but the bulb inside appears to be 125 W. Since I want to use 175 W mercury vapor instead, is it possible to swap out the medium base for mogul base and use the 175 W mercury vapor bulb? It has an H42 ballast, no capacitor. Thank you. |
| "pfjw@aol.com" <peterwieck33@gmail.com>: Sep 08 06:27AM -0700 No. About covers it. Peter Wieck Melrose Park, PA |
| John-Del <ohger1s@gmail.com>: Sep 07 09:51AM -0700 On Thursday, September 5, 2019 at 5:52:17 PM UTC-4, Tom Biasi wrote: > > One just needs a recap but the other has different issues. There are several encapsulated modules in these radios and I'd like to know what it's in them. > Those numbers are in SAMs AR36 and AR41 but are listed for Falcon. > Fairlane lists TPO Your right Tom, it's a 6TPO. It's stamped in the side but barely legible. The '67 just needed a recap. The '66 was recapped many years ago, apparently by me according to the owner when he picked up the '67, but now it's dead other than a thump on turn on. I injected a finger pulse into the final, and it's loud and clear. One of the IF transistors has no voltage on any pin, so it's got a bad encapsulated module as it has very few discrete components on the board. The closest manual I had is an AR-43 for a Galaxie, but the board in that has no encapsulated modules. The only thing they share is a PNP Germanium output. Glad I don't need one of those. A friend thinks he might have the AR-36 so I'll find out tomorrow. |
| Tom Biasi <tombiasi@optonline.net>: Sep 07 12:57PM -0400 On 9/7/2019 12:51 PM, John-Del wrote: > I injected a finger pulse into the final, and it's loud and clear. One of the IF transistors has no voltage on any pin, so it's got a bad encapsulated module as it has very few discrete components on the board. > The closest manual I had is an AR-43 for a Galaxie, but the board in that has no encapsulated modules. The only thing they share is a PNP Germanium output. Glad I don't need one of those. > A friend thinks he might have the AR-36 so I'll find out tomorrow. Good luck. |
| Fox's Mercantile <jdangus@att.net>: Sep 07 01:05PM -0500 On 9/7/19 11:51 AM, John-Del wrote: > voltage on any pin, so it's got a bad encapsulated > module as it has very few discrete components on > the board. It'll be a bit of a kluge, but you can substitute that Couplate with discrete components. -- "I am a river to my people." Jeff-1.0 WA6FWi http:foxsmercantile.com |
| You received this digest because you're subscribed to updates for this group. You can change your settings on the group membership page. To unsubscribe from this group and stop receiving emails from it send an email to sci.electronics.repair+unsubscribe@googlegroups.com. |
No Response to "Digest for sci.electronics.repair@googlegroups.com - 5 updates in 2 topics"
Post a Comment