| amdx <nojunk@knology.net>: Dec 11 10:09AM -0600 On 12/10/2016 6:08 PM, John Harmon wrote: > angles are the *same* at the rear and front of the wheel! > I'm sure the answer to that question is simple but everyone says it's a > math trig issue but it's really a conceptual misunderstanding on my part. I think you have a misunderstanding of total toe. It is simply Right wheel toe plus Left wheel toe. I don't see why it needs to be measured, if you have set left and right, total toe is just the addition of the two angles. See the explanation on page two, in the verbiage below the top left figure. > http://www.hunter.com/Portals/0/Media/995-T-2.pdf All your draws use the centerline of your tire, which you can't physically do. I would use the outside of the wheel, however, when you get your adapter with laser built, the line will be further out from the wheel edge. Here's my vision. Feel from to make your own drawing, Paint wouldn't modify yours the way I wanted. > https://www.dropbox.com/s/jap3k6l6z3pmgzb/TOE%20IN.jpg?dl=0 Mikek |
| You received this digest because you're subscribed to updates for this group. You can change your settings on the group membership page. To unsubscribe from this group and stop receiving emails from it send an email to sci.electronics.repair+unsubscribe@googlegroups.com. |
No Response to "Digest for sci.electronics.repair@googlegroups.com - 1 update in 1 topic"
Post a Comment